![]() |
Legal Solenoids
Hello from Team 253,
We were wondering if there is a list of legal solenoids or if we are required to only using solenoids from AndyMark. We are looking to buy some solenoids from like McMaster of Granger. Thanks for the help! Shane |
Re: Legal Solenoids
Quote:
|
Re: Legal Solenoids
Quote:
Shane |
Re: Legal Solenoids
Quote:
On another note, why buy solenoids from McMaster? Narrowing down their selection to 12 or 24 VDC solenoids, they are all either low flow or very expensive. If you do buy a solenoid with a working pressure of lower than 120 PSI, you have to have an additional relief valve on your low pressure side set lower than the working pressure of your solenoid. |
Re: Legal Solenoids
Quote:
Any Ideas? Thanks! Shane |
Re: Legal Solenoids
Have you looked into VexPro's stock? It may be a tad more expensive, as you need the solenoid base to go with it, but in the end it is quite compact. We have never had problems with it so far. With their new partnership with WCP, you can go to West Coast Products and order them from there. Since it is a California based company, you should get them very quickly!
|
Re: Legal Solenoids
With the dropping of the max Cv requirement, sourcing solenoid valves suddenly got a lot easier.
Automation Direct is a good source for solenoid valves. Free shipping for orders over $49.00 They also have a voucher in the KOP. Their max working pressure is 115 PSI so you will need the secondary relief valve per rule. Mac & SMC are also commonly used on FRC bots. Available online or through your local automation supplier. |
Re: Legal Solenoids
Quote:
|
Re: Legal Solenoids
|
| All times are GMT -5. The time now is 05:51. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi