Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Aztechs 157 Frame Sneak (http://www.chiefdelphi.com/forums/showthread.php?t=125798)

The_ShamWOW88 04-02-2014 08:53

pic: Aztechs 157 Frame Sneak
 

notmattlythgoe 04-02-2014 08:57

Re: pic: Aztechs 157 Frame Sneak
 
Very nice looking, any issues turning on carpet with the pneumatic wheels?

The_ShamWOW88 04-02-2014 09:09

Re: pic: Aztechs 157 Frame Sneak
 
We tested it and there didn't appear to be any issues but can switch out with different wheels if need be.

jkessler_22 04-02-2014 09:22

Re: pic: Aztechs 157 Frame Sneak
 
Be sure to test it with the full anticipated weight and on carpet. I was on a team that was burned by this late revelation and we had a hopping bot once all the parts were attached. Needless to say, we had to change our wheels.

Good luck on the rest of your build !

Nick Lawrence 04-02-2014 09:24

Re: pic: Aztechs 157 Frame Sneak
 
Did you try driving it on carpet weighed down to 120lbs?

If it doesn't turn, all hope isn't lost - you could change one end or both ends to a smoother tire with a less aggressive tread pattern.

-Nick

JamesCH95 04-02-2014 11:01

Re: pic: Aztechs 157 Frame Sneak
 
Boy, I really hope that drivetrain is 8 CIMs/mini-CIMs. That would be sweet.


All times are GMT -5. The time now is 17:39.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi