Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: integration dual cylinder ballshifter (http://www.chiefdelphi.com/forums/showthread.php?t=125864)

tag_groff 05-02-2014 14:57
pic: integration dual cylinder ballshifter
 

billbo911 05-02-2014 14:58
Re: pic: integration dual cylinder ballshifter
 
Nice implementation and build in this. Well done!

Now, this begs the question: Why??

What prompted you to need the extra shifting force?

Peyton Yeung 05-02-2014 15:27
Re: pic: integration dual cylinder ballshifter
 
My guess is to release the system under load. They said it was for their winch.

tag_groff 05-02-2014 16:09
Re: pic: integration dual cylinder ballshifter
 
Quote:
Originally Posted by billbo911 (Post 1338052)
Nice implementation and build in this. Well done!

Now, this begs the question: Why??

What prompted you to need the extra shifting force?
our winch pulley was under so much tension that at 60psi the pancake didn't have enough force to disengage the clutch, so when we upped our regulator to 80psi, that was plenty. So our solution was to simply add another cylinder.

billbo911 05-02-2014 16:13
Re: pic: integration dual cylinder ballshifter
 
Quote:
Originally Posted by tag_groff (Post 1338092)
our winch pulley was under so much tension that at 60psi the pancake didn't have enough force to disengage the clutch, so when we upped our regulator to 80psi, that was plenty. So our solution was to simply add another cylinder.
Got it.

It would be interesting to disassemble the shifter after the season and see how the internals held up after the season is over.


All times are GMT -5. The time now is 11:29.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi