Chief Delphi - Bumper attatchment points

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Bumper attatchment points (http://www.chiefdelphi.com/forums/showthread.php?t=126066)

RunAdamRun

08-02-2014 15:00

Bumper attatchment points

In the rules it does not specify a finite amount of attachment points are needed on the bumpers. Also it does not specify the amount of space that is allowed between the bumpers attachment points. Are there rules for these?

Strategist257

08-02-2014 16:52

Re: Bumper attatchment points

http://www.chiefdelphi.com/forums/sh...hreadid=126041

FrankJ

08-02-2014 21:29

Re: Bumper attatchment points

R21 F) Says your attachment system needs to be Rigid, tight, robust. How you get there is up to you. Your robot inspector will decide if you succeeded. We have always use 2 attachment per bumper segment. Generally mid way from the ends & the middle. Never has been an issue.

All times are GMT -5. The time now is 05:39.