Chief Delphi - Relay Solenoid vs. Double Solenoid? Double Solenoid Wired to Relay in DSC.

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Relay Solenoid vs. Double Solenoid? Double Solenoid Wired to Relay in DSC. (http://www.chiefdelphi.com/forums/showthread.php?t=126084)

chigskonkwo

09-02-2014 07:39

Re: Relay Solenoid vs. Double Solenoid? Double Solenoid Wired to Relay in DSC.

Quote:

Which slot is your NI 9742 module installed in?

To help rule out hardware problems with the cRIO or the module, run one of the examples (e.g. Solenoid with Compressor). If the green LED on the module still doesn't light when you turn on the solenoid output, I suggest that you should talk to NI about getting a replacement.

Thanks, we will try this on Monday.

Gregor

09-02-2014 10:41

Re: Relay Solenoid vs. Double Solenoid? Double Solenoid Wired to Relay in DSC.

Quote:

Originally Posted by Alan Anderson (Post 1339950)

That's good advice for problems controlling a Spike relay, but the Digital Sidecar is not involved at all in the problem being described here.

Totally missed the 24v solenoid part... Thanks.

All times are GMT -5. The time now is 18:33.

Page 2 of 2

Show 100 post(s) from this thread on one page