Chief Delphi - How do you program the signal light?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - How do you program the signal light? (http://www.chiefdelphi.com/forums/showthread.php?t=126211)

antj	10-02-2014 20:09

How do you program the signal light?

I want to know how to program the signaling light for tele-op and autonomous mode, etc. in labview please. Thank you.
:confused:

orangemoore

10-02-2014 20:58

Re: How do you program the signal light?

You don't. It is already written when you create a Crio Project.

DonRotolo

10-02-2014 21:29

Re: How do you program the signal light?

Yes, just connect it as shown and it works. Like magic.

dradel

10-02-2014 21:43

How do you program the signal light?

Just make sure you hook it up properly. If you reverse the polarity all the Magic smoke comes out and no longer will work.

Student hooked it up backwards last year, expensive mistake.

tcjinaz

11-02-2014 23:42

Re: How do you program the signal light?

Quote:

Originally Posted by dradel (Post 1340955)

Just make sure you hook it up properly. If you reverse the polarity all the Magic smoke comes out and no longer will work.

Student hooked it up backwards last year, expensive mistake.

Are you sure you were'nt top-heavy with 1's, where 0's would have kept the weight down?

antj	12-02-2014 19:50

Re: How do you program the signal light?

Ok thank you. Our team figured out that our light wasn't getting enough voltage.

All times are GMT -5. The time now is 09:48.