Vex Pro Mecanum Wheel Roller Inquiry
 

Hello, for anyone who has Vex Pro 6 in mecanum wheels, do you have problems with the rollers becoming loose such as the in Ri3D team who changed their wheels to Andymark mecanum?
Ri3D El toro improvements: http://youtu.be/qCxZqPNmV9E

So after testing our robot today, I noticed some rollers were wobbly and make contact with the plastic mount, yet others and the new ones purchased don't wobble however roll fine. Is it natural wear or a defect of the rollers?
Thanks.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

We used the 6'' wheels last year, and they worked well for us (for 2 competitions) until we started doing lots of demos and fundraisers. 3 of the rollers broke, but you can buy replacement ones which are fairly easy to switch out.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

We used the 6" through two regionals and some demos with no problem last year, and have been beating up those same wheels on our practice bot. They seem to be running fine.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

We were using Vex 6" mecanums on our preseason drivetrain and they worked well. We had little problems with rollers losening. However when we got to full competition weight we had problems. We snapped at least five rollers off in one night under normal driving conditions. Part of the problem may be that we are using ball shifters with a CIM and a Mini CIM to power each wheel. Suffice to say, we have switched to Andymark wheels on the competition version.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

Do the Andymark mecanum provide better strafing than the vex mecanum with the rollers loose?

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

People have said that strafing with VEX mecanums isn't as good as Andymark's

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

our old Andymark machanum wheels that where on our Logomotion (2011 i think) robot still are in working condition, we used that bot in many events and fundraisers running it on anything from tarp to FTC floor marerial with little issue, as for the VEX wheels i have not personal experience, but i have not herd too many good things about them. if you are planning to use a macanum size that Andymark offers i highly recomend using Andymark.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

Post links please.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

With gyro assist, we don't see any appreciable difference.

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

In the video posted by the op, the guy (currently don't know his name) stated that when one of the wheels became loose, it jammed when moving sideways. We personally haven't used them because we don't like mecanum, but we still look around ;)

Re: Vex Pro Mecanum Wheel Roller Inquiry
 

The Andymark mecanums roll and strafe a bit smoother than the Vex ones because they have more rollers. That said, the Vex wheels don't strafe bad at all.