Chief Delphi - 3D-Printed Parts on the BOM

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - 3D-Printed Parts on the BOM (http://www.chiefdelphi.com/forums/showthread.php?t=126604)

NWChen

16-02-2014 21:23

3D-Printed Parts on the BOM

Do 3D-printed components belong on the Bill of Materials? If so, is the cost simply that of the material used?

orangemoore

16-02-2014 21:29

Re: 3D-Printed Parts on the BOM

Yes, they belong on the BOM. Because they are a piece of the robot. I do not know the answer to the second question.

EricH

16-02-2014 21:31

Re: 3D-Printed Parts on the BOM

First answer: Yes.

Second answer: See Q&A, Q267.

cgmv123

16-02-2014 21:32

Re: 3D-Printed Parts on the BOM

Quote:

Originally Posted by Signet (Post 1344217)

Do 3D-printed components belong on the Bill of Materials?

Yes, everything on your robot that costs over $1 is required to be listed.

Quote:

If so, is the cost simply that of the material used?

Cost of the raw material and cost of labor if it was done by someone other than a team member or a team sponsor.

All times are GMT -5. The time now is 05:41.