Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Light? (http://www.chiefdelphi.com/forums/showthread.php?t=126657)

NickRobischeau9 17-02-2014 14:59
Light?
 
My team was wondering about the light.

Are there any specific rules on the orange blinking lights location?

REPLIES ARE NEEDED AS SOON AS POSSIBLE

notmattlythgoe 17-02-2014 14:59
Re: Light?
 
Quote:
Originally Posted by NickRobischeau9 (Post 1344612)
My team was wondering about the light.

Are there any specific rules on the lights?

REPLIES ARE NEEDED AS SOON AS POSSIBLE
Which light? You're going to have to be more specific.

RamZ 17-02-2014 15:00
Re: Light?
 
Quote:
Originally Posted by NickRobischeau9 (Post 1344612)
My team was wondering about the light.

Are there any specific rules on the lights?

REPLIES ARE NEEDED AS SOON AS POSSIBLE
What do you mean by
Quote:
the light.
?

Are you referring to the blinking orange light? One of a speed controller?

NickRobischeau9 17-02-2014 15:02
Re: Light?
 
YES THE ORANGE BLINKING LIGHT

notmattlythgoe 17-02-2014 15:04
Re: Light?
 
Code:
R63
ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:

mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO,
and wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

RamZ 17-02-2014 15:04
Re: Light?
 
Quote:
Originally Posted by NickRobischeau9 (Post 1344617)
YES THE ORANGE BLINKING LIGHT

What do you want to know about it?
Please explain all that you want to know, or it'll be hard for us to help you.

Whippet 17-02-2014 15:06
Re: Light?
 
Quote:
Originally Posted by R63
ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:
  • mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
  • connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
  • wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.
See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.
These are the rules.

EDIT: Bah, notmattlythgoe beat me to the punch...

NickRobischeau9 17-02-2014 15:07
Re: Light?
 
THe location of the Light like how high and where

notmattlythgoe 17-02-2014 15:08
Re: Light?
 
Quote:
Originally Posted by NickRobischeau9 (Post 1344623)
THe location of the Light like how high and wear
As long as it is visible by someone standing 3 feet in front of the robot it doesn't matter where.

Whippet 17-02-2014 15:08
Re: Light?
 
Quote:
Originally Posted by R63
ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:
  • mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
  • connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
  • wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.
See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.
(Emphasis mine)

EDIT: Beat to it again. :rolleyes:

NickRobischeau9 17-02-2014 15:20
Re: Light?
 
Thanks For the Help


All times are GMT -5. The time now is 05:40.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi