Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)
-   -   Solenoid isuues (http://www.chiefdelphi.com/forums/showthread.php?t=126695)

drifter1310 17-02-2014 20:32

Solenoid isuues
 
So our solenoid is not switching our pistons back and forth. It compresses them but will not release that pressure when it is switched, it simply applies pressure in both directions. Has anyone had a similar problem or have a solution?

Mark McLeod 17-02-2014 20:36

Re: Solenoid isuues
 
It sounds like the solenoid valve is plumbed incorrectly.
As if you have an exhaust port blocked.

drifter1310 17-02-2014 20:42

Re: Solenoid isuues
 
That doesnt make sense, because if that were true then it would let all the air out from the port that it should ave been plugged into.

drifter1310 17-02-2014 21:33

Re: Solenoid isuues
 
We fixed it by replacing the electrical plug in


All times are GMT -5. The time now is 05:41.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi