Chief Delphi - cRio Module Slots

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - cRio Module Slots (http://www.chiefdelphi.com/forums/showthread.php?t=126699)

adlasa

17-02-2014 21:19

cRio Module Slots

Our cRio modules are plugged in as follows
Slot 5 Analog
Slot 6 Digital
Slot 7 Solenoid

Currently our Safety light, and battery voltage are not working. Is there anyway to configure the cRio for this non default configuration? Furthermore is the setup above even legal?

Thanks for the help. We can't put our modules in the default positions because of mechanical restrictions.

Chris_Ely

17-02-2014 21:23

Re: cRio Module Slots

Your set up is not legal, see R70A

Quote:

A. National Instruments 9201 analog module must be installed in slot 1 of the cRIO.

Mark McLeod

17-02-2014 21:24

Re: cRio Module Slots

Not legal.
The rules call for an Analog in Slot 1 and a Digital in slot 2.
That's where the battery voltage is read from and the RSL is sent.

adlasa

17-02-2014 21:43

Re: cRio Module Slots

Thank you, we appreciate the speed of your replies. We'll be changing this shortly.

All times are GMT -5. The time now is 20:13.