Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   Maxbotics I2C Ultrasonic (http://www.chiefdelphi.com/forums/showthread.php?t=126742)

progmentor250 18-02-2014 11:16

Maxbotics I2C Ultrasonic
 
Has anyone successfully used the I2C ultrasonic sensors? We can't get them to work on the bus. They work on our Arduino but the cRIO I2C seems to operate differently.

Thanks

RandeJ 18-02-2014 15:24

Re: Maxbotics I2C Ultrasonic
 
We're using it in analog, not I2C mode. It's a little slow in analog mode (due to 2Hz filter), but works well enough (and is easy to get up and running). Be curious to hear your comments if/when you do get the I2C mode going.

Colin Small 24-02-2014 18:13

Re: Maxbotics I2C Ultrasonic
 
We're looking at the MB1240. I don't mean to thread hijack, but I didn't think having two topics for the same subject was needed. I'm anxious to see what other people think about it.

progmentor250 03-03-2014 23:47

Re: Maxbotics I2C Ultrasonic
 
We are using the MB1222 and we did finally get it working. It requires a little faking the system but it works and we'll post the code shortly.


All times are GMT -5. The time now is 07:56.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi