Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   2383- the Ninjineers 2014 Reveal (http://www.chiefdelphi.com/forums/showthread.php?t=126925)

brrian27 20-02-2014 12:40

2383- the Ninjineers 2014 Reveal
 
Well, you may or may not have seen our prototype videos earlier on, but here is our final reveal video!!

-Swerve drivetrain
-Wheeled shooter/feeder
-Defensive pole
-Catching net

Check it out! :)

http://www.youtube.com/watch?v=qom3cB0o2gA

nxtmonkeys 20-02-2014 13:09

Re: 2383- the Ninjineers 2014 Reveal
 
Of course the ninjaneers name their robot the ninja. what else?


But really

I like the bot


a lot.




(no rhyme
was intended
at the time)

George1902 20-02-2014 14:11

Re: 2383- the Ninjineers 2014 Reveal
 
One of my favorite Florida teams.

Can't wait to see the 'bot in person. Great work!

droswell 20-02-2014 14:22

Re: 2383- the Ninjineers 2014 Reveal
 
I really like it - unique design, cool blocker, and circular bumper. It stands out, and is simple but effective. Great work and good luck 2383!

brrian27 20-02-2014 15:04

Re: 2383- the Ninjineers 2014 Reveal
 
Thanks guys! Good luck to you all too

Max Boord 20-02-2014 19:48

Re: 2383- the Ninjineers 2014 Reveal
 
Mecanum at swamp and swerve 2 days later... HOW?

And we will gladly throw to you guys! I don't remember a single missed catch at scrimmage (at least when we threw it).

orangemoore 20-02-2014 19:57

Re: 2383- the Ninjineers 2014 Reveal
 
Your robot looks really good!

I may be wrong but I believe that your bumpers are not completely legal.

Quote:

R19
ROBOTS are required to use BUMPERS to protect all outside corners of the FRAME PERIMETER. For adequate protection, at least 8 in. of BUMPER must be placed on each side of each outside corner (see Figure 4-5). If a side is shorter than 8 in., the entire side must be protected by BUMPER (see Figure 4-6). For the purposes of R19, a round or circular FRAME PERIMETER has an infinite number of corners.

orangemoore 20-02-2014 20:04

Re: 2383- the Ninjineers 2014 Reveal
 
Quote:

Originally Posted by dodar (Post 1347190)
All that means is that no more than 8 inches of frame perimeter can be open. They are fine.

Ah I misread the rule.

brrian27 20-02-2014 20:23

Re: 2383- the Ninjineers 2014 Reveal
 
Quote:

Originally Posted by Max Boord (Post 1347174)
Mecanum at swamp and swerve 2 days later... HOW?

And we will gladly throw to you guys! I don't remember a single missed catch at scrimmage (at least when we threw it).

hahaha, I knew we'd get some weird responses to that xD

Our swerve was not quite ready by Saturday, so we could not use it then! We made mecanum mounts for a backup since swerve could go wrong. :)

It was great to practice with you guys too! Hopefully the passing/catching will continue in Orlando and South Florida!

brrian27 20-02-2014 20:24

Re: 2383- the Ninjineers 2014 Reveal
 
Quote:

Originally Posted by orangemoore (Post 1347192)
Ah I misread the rule.

But since there is an "infinite number of corners" does that mean an infinite amount of sides less than 8 inches (which would need to be covered)? Hmm

holygrail 20-02-2014 20:28

Re: 2383- the Ninjineers 2014 Reveal
 
Nice, unique robot design,

Only thing I would be concerned about is an entanglement hazard with that big net you have.

brrian27 21-02-2014 08:08

Re: 2383- the Ninjineers 2014 Reveal
 
Quote:

Originally Posted by holygrail (Post 1347203)
Nice, unique robot design,

Only thing I would be concerned about is an entanglement hazard with that big net you have.

True, thanks for the tip. I don't think it'll be an issue, but we'll keep an eye on it.

orangemoore 21-02-2014 13:06

Re: 2383- the Ninjineers 2014 Reveal
 
Quote:

Originally Posted by brrian27 (Post 1347200)
But since there is an "infinite number of corners" does that mean an infinite amount of sides less than 8 inches (which would need to be covered)? Hmm

I have no idea what to think right now. I just wanted to point that out. It may be time to get a question in the Q and A.

brrian27 21-02-2014 13:33

Re: 2383- the Ninjineers 2014 Reveal
 
Quote:

Originally Posted by orangemoore (Post 1347565)
I have no idea what to think right now. I just wanted to point that out. It may be time to get a question in the Q and A.

Haha okay, thanks for bringing it up!


All times are GMT -5. The time now is 18:43.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi