Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Best place to buy batteries and a charger? (http://www.chiefdelphi.com/forums/showthread.php?t=126993)

Bill_B 26-02-2014 20:21

Re: Best place to buy batteries and a charger?
 
Something of a puzzle to get the small gauge wire connected to the batteries without using the surface-disturbing clips that come with the charger. post or message me if you want instructions on how to hitch the big anderson connectors to the small charging cable. I put four of those chargers onto a cart a while ago.

Doc Wu 03-03-2014 11:15

Re: Best place to buy batteries and a charger?
 
Quote:

Originally Posted by Bill_B (Post 1350258)
Something of a puzzle to get the small gauge wire connected to the batteries without using the surface-disturbing clips that come with the charger. post or message me if you want instructions on how to hitch the big anderson connectors to the small charging cable. I put four of those chargers onto a cart a while ago.

Don't hold out. Lots of people read this and would like to know how you do it.

The best way we've found is to buy some SB-50 shells with the proper sized contacts. APP makes some that easily solder to a 10-12-14 gauge wire.

Bill_B 03-03-2014 14:06

Re: Best place to buy batteries and a charger?
 
3 Attachment(s)
I put in a temporary hack to adapt the cables coming up on two years ago. It's working OK so I have little incentive to correct it. Look at original posting for short description and a couple of detail pics. More pics attached along with a shot of the mostly finished cart. This method has the advantage of allowing the battery side of the cables to be easily reused. There is electrical tape now covering the terminal adapter and ziptie. I really should find those Anderson replacement connectors and staple them to the cart in case I get enough energy to install them.

AllenGregoryIV 03-03-2014 15:25

Re: Best place to buy batteries and a charger?
 
Quote:

Originally Posted by Doc Wu (Post 1352551)
The best way we've found is to buy some SB-50 shells with the proper sized contacts. APP makes some that easily solder to a 10-12-14 gauge wire.

That's how we do it too, though I always run out of connectors because we fix other teams chargers at events. I haven't bought any this year but I would have liked to have them with me when I was working at Alamo this weekend.

This is where I normally get mine.

Doc Wu 03-03-2014 22:34

Re: Best place to buy batteries and a charger?
 
Bill_B I actually like your way of doing it as well, because you are mounting the terminal block in your charging stand. I've seen so many teams with battery pigtails spliced onto the charger cord and taped up. It works, but it looks so ghetto!

safiq10 04-03-2014 00:16

Re: Best place to buy batteries and a charger?
 
We have had great luck with the andymark 3 battery charger. But their one charger we had that I warn against buying I dont remember what it is called but I will check on it Tomorrow.:yikes:


All times are GMT -5. The time now is 01:44.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi