Chief Delphi - Vision Targeting Problems

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Vision Targeting Problems (http://www.chiefdelphi.com/forums/showthread.php?t=127292)

twignation

27-02-2014 19:33

Vision Targeting Problems

1 Attachment(s)

In the Target Ditection VI, the target is showing up in the mask, but it is not being recognized as active, that is, it is not drawing any boxes around it.

RufflesRidge

27-02-2014 20:51

Re: Vision Targeting Problems

Where's the vertical stripe? I think the code needs that to identify it as a target.

twignation

27-02-2014 22:10

Re: Vision Targeting Problems

We are trying to get the horizontal reflective tape. The mask shows it in red but it does not draw a green or red box around it at any time. It does draw red boxes for other things such as shiny metal or my hand. We'll try the vertical stripe tomorrow to see if it makes a difference.

Greg McKaskle

01-03-2014 12:22

Re: Vision Targeting Problems

First, I'd compare the size of the particle to the size limit parameter. Also look at the array of target descriptors to see if the issue is only with drawing the annotation.

Greg McKaskle

twignation

02-03-2014 23:18

Re: Vision Targeting Problems

Thanks for the responses, we resolved the issue by creating the vertical stripe to go along with it.

All times are GMT -5. The time now is 08:55.