Chief Delphi - Pressure switch

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Pressure switch (http://www.chiefdelphi.com/forums/showthread.php?t=127487)

Ikillee

04-03-2014 18:27

Pressure switch

How do you wire the pressure switch

Anthony Galea

04-03-2014 18:38

Re: Pressure switch

Chris_Ely

04-03-2014 18:39

Re: Pressure switch

Take a PWM cable. Connect the black wire to one terminal, and the white wire to the other (you don't need the red wire). Plug the other end of the PWM cable into a DIO port on digital side car.
EDIT: Anthony beat me to it.

chigskonkwo

04-03-2014 18:41

Re: Pressure switch

Use a PWM wire, remove the male end of the PWM and attach the black wire to one screw and the white wire to another screw, leaving the red wire unused. Then plug the female end of the PWM into the Digital Output 1 (DIO).

EDIT:

Quote:

Originally Posted by luckof13 (Post 1353517)

Both of them beat me to it lol.

Ikillee

04-03-2014 19:38

Sweet. Thanks! What does the limit switch in the diagram do?

Chris_Ely

04-03-2014 19:47

Re: Pressure switch

Quote:

Originally Posted by Ikillee (Post 1353559)

Sweet. Thanks! What does the limit switch in the diagram do?

It provides feedback for when a cylinder is activated. You don't need to have that.

All times are GMT -5. The time now is 10:25.