Chief Delphi - How to improve power in piston shooter

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - How to improve power in piston shooter (http://www.chiefdelphi.com/forums/showthread.php?t=128356)

Qbot2640

31-03-2014 15:10

Re: How to improve power in piston shooter

Quote:

Originally Posted by LR_connor (Post 1367274)

Thank you for the information do you have any recommendations of where we can get some?

McMaster Carr item 6124K511 is a great one:
http://www.mcmaster.com/#catalog/120/1007/=rc4031

nuclearnerd

31-03-2014 15:12

Re: How to improve power in piston shooter

Quote:

Originally Posted by LR_connor (Post 1367274)

Thank you for the information do you have any recommendations of where we can get some?

This one has a CV of 1.0 with a 1/8 npt port, Which is 3 or 4 times larger than the SMC / Festo valves you can get from AndyMark or Vex. We haven't used them though, so don't consider this an endorsement:

http://www.mcmaster.com/#6425k11/=rc3uws

jwfoss

31-03-2014 15:15

Re: How to improve power in piston shooter

Quote:

Originally Posted by nuclearnerd (Post 1367286)

FRC558 will endorse them, they are currently running well on our machine.

nuclearnerd

31-03-2014 15:31

Re: How to improve power in piston shooter

Quote:

Originally Posted by jwfoss (Post 1367288)

FRC558 will endorse them, they are currently running well on our machine.

Cool. Do you have the actual manufacturer and model number then? It would be nice to look up the original spec sheet.

falconmaster

31-03-2014 15:33

Re: How to improve power in piston shooter

Quote:

Originally Posted by LR_connor (Post 1367274)

Thank you for the information do you have any recommendations of where we can get some?

The brand is Norgren and they can be found on McMaster Carr

jwfoss

31-03-2014 16:00

Re: How to improve power in piston shooter

Quote:

Originally Posted by nuclearnerd (Post 1367296)

Cool. Do you have the actual manufacturer and model number then? It would be nice to look up the original spec sheet.

Sure, they are made by Numatics Inc.The link should take you right to the product page.

TikiTech

31-03-2014 21:22

Re: How to improve power in piston shooter

We use the Nitra AVS 3211-24d solenoids from Automation Direct.
http://www.automationdirect.com/adc/...)/AVS-3211-24D
These are 24v with a Cv of .78. We use these on 10" Bimba 1.5" bore cylinders and have been really happy with them.
Plus we used the product voucher from FIRST... Even if you do not use the voucher they are about 21.00 each.

Good luck

Aloha

All times are GMT -5. The time now is 16:20.

Page 2 of 2

Show 100 post(s) from this thread on one page