Chief Delphi
Page 3 of 3 < 12 3
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 2451 Pwnage (http://www.chiefdelphi.com/forums/showthread.php?t=128465)

Aren Siekmeier 23-05-2014 03:23
Re: pic: Team 2451 Pwnage
 
Quote:
Originally Posted by rnewendyke (Post 1386586)
I just checked one of my error logs and ours seem to match up. It usually takes a couple of tries to get larger files to load, so be prepared to give it a couple of tries.

I've gotten it to open on a machine running an i3 with 4 gb of ram at my high school that was running Inventor as well as on my laptop with an i7 and 8 gb of ram running SolidWorks.
Killing lots of NI, Google, and other stuff and upping the priority worked (with a little bit of a wait) on my i7 quad w/ 8 gig. It's been a while since I've cleaned up my Windows side...

Thanks for the tips!

rnewendyke 23-05-2014 16:29
Re: pic: Team 2451 Pwnage
 
Quote:
Originally Posted by compwiztobe (Post 1387055)
Killing lots of NI, Google, and other stuff and upping the priority worked (with a little bit of a wait) on my i7 quad w/ 8 gig. It's been a while since I've cleaned up my Windows side...

Thanks for the tips!
Glad to know it worked for you. Any time you open a STEP that was originally an assembly there's going to be some kind of wait. I think the longest I've ever had to wait was 20-30 minutes for one of the Robonauts' masterpieces to load.

If there's anything else you need help with please don't hesitate to ask.

tickspe15 23-05-2014 16:55
Re: pic: Team 2451 Pwnage
 
Quote:
Originally Posted by rnewendyke (Post 1386586)
I just checked one of my error logs and ours seem to match up. It usually takes a couple of tries to get larger files to load, so be prepared to give it a couple of tries.

I've gotten it to open on a machine running an i3 with 4 gb of ram at my high school that was running Inventor as well as on my laptop with an i7 and 8 gb of ram running SolidWorks.
The files seem to open fine on my computer.
i7 4930k @ 4.7ghz
32GB of Ram
EVGA GTX 780ti

Roboshant 14-03-2016 17:48
Re: pic: Team 2451 Pwnage
 
Hey it seem the CAD link no longer works. Does anyone have a stored version or an alternate link they would be willing to share with me?

nickrod99 06-10-2016 21:23
Re: pic: Team 2451 Pwnage
 
hey, i am extremely interested in your design but the lind for the cad is no longer working. could i have the files? that would be awesome. Thank you

pwnageNick 06-10-2016 21:41
Re: pic: Team 2451 Pwnage
 
Sorry about this. I'm going to work on getting the file available in a google docs folder. I'll update when it's there with a link.

Until I get that set up if you go to our website here and scroll to 2014 there is a tech notes that has a lot of detail about the mechanical design and a ton of good information about how the programming was done.

Kevin Ainsworth 07-10-2016 15:07
Re: pic: Team 2451 Pwnage
 
ftp://Kevin061815:Ainsworth@files.ge...utomation.com/

Try this link, it has three different swerve designs, our battery cart and a Solidworks configurable Vex Versaplanetary gearbox with single stage, double stage, choice of motors, dual motor and all available output shafts.

Kevin Ainsworth 13-12-2016 11:34
Re: pic: Team 2451 Pwnage
 
ftp://Pwnage120916:2451@files.genesisautomation.com
New File Location


All times are GMT -5. The time now is 08:34.
Page 3 of 3 < 12 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi