Chief Delphi - Double sided intake club

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Double sided intake club (http://www.chiefdelphi.com/forums/showthread.php?t=128679)

Caleb Sykes

10-04-2014 13:17

Double sided intake club

I remember a couple of "clubs" last year (7 disc auto, 50point climb/dump, etc...) and I thought it would be fun to showcase some of the niche robots like this again. Please post pictures and/or video if you have them.

At my team's regional, we (4536) were the only double-sided intake bot. Here is our highlight video from that event. We really liked the flexibility that this design gave us, we could play either the back or middle zone really well. We were hoping that we could get a ton of assist points which we did.

Watching webcasts, I have seen 254, 3467, 95, and 1678, but I am sure that there are even more double-siders out there.

connor.worley

10-04-2014 13:22

Re: Double sided intake club

1538 has two intakes.

Peyton Yeung

10-04-2014 13:28

Re: Double sided intake club

Team 461 has a double sided intake.

Abhishek R

10-04-2014 13:28

Re: Double sided intake club

1477 has two as well.

AllenGregoryIV

10-04-2014 13:37

Re: Double sided intake club

Quote:

Originally Posted by Abhishek R (Post 1372122)

1477 has two as well.

As does 2881

1493kd

10-04-2014 13:39

Re: Double sided intake club

1493 has two also. Wish we would have utalized the benifits of it more. Makes for great strategy.

topgun

10-04-2014 13:40

Re: Double sided intake club

Actually Caleb you weren't the only one at 10K Lakes. We do double side intake, but without two intakes. Our robot is symmetric so we can put the vacuum down on either side of the robot.

Picture here:

JDGallagher

10-04-2014 13:43

Re: Double sided intake club

Team 1086 has two side intakes.

Kris Verdeyen

10-04-2014 13:49

Re: Double sided intake club

Gatorzillas 2936 has it too.

Gweiss96

10-04-2014 13:52

Re: Double sided intake club

Team 696 also has double sided intake.

Taylor

10-04-2014 14:08

Re: Double sided intake club

3147 and 1529 can load either side.

Mgjohnson

10-04-2014 14:31

Re: Double sided intake club

Well, I guess you could call 2481's intake two sided (or more like three sided, as it is 270 degrees), but I don't know if that really counts...

www.youtube.com/watch?v=6NEaVj4dT8s

Chris Fultz

10-04-2014 14:35

Re: Double sided intake club

And 234.

Peter Matteson

10-04-2014 15:22

Re: Double sided intake club

And RAGE, 173

Al Skierkiewicz

10-04-2014 16:55

Re: Double sided intake club

And 111.

Citrus Dad

10-04-2014 17:05

Re: Double sided intake club

1678 with flexible acrylic arms that I haven't seen elsewhere yet.

R.C.	10-04-2014 17:09

Re: Double sided intake club

Quote:

Originally Posted by Citrus Dad (Post 1372218)

1678 with flexible acrylic arms that I haven't seen elsewhere yet.

Polycarbonate arms :P right?

Boe	10-04-2014 17:15

Re: Double sided intake club

Quote:

Originally Posted by Citrus Dad (Post 1372218)

1678 with flexible acrylic arms that I haven't seen elsewhere yet.

1714 also has polycarb a arms...as well as a polycarb frame and shooter

Abhishek R

10-04-2014 17:24

Re: Double sided intake club

Quote:

Originally Posted by Citrus Dad (Post 1372218)

1678 with flexible acrylic arms that I haven't seen elsewhere yet.

1477's are flexible...I think they're polycarbonate.

Aidan H.

10-04-2014 17:32

Re: Double sided intake club

Also 624! Though it seems they haven't utilized them for a 3 ball auto... Yet... (They are probably limited by their catapult's recharge speed and their routine of getting double hot goal)

AllenGregoryIV

10-04-2014 17:33

Re: Double sided intake club

Quote:

Originally Posted by Abhishek R (Post 1372228)

1477's are flexible...I think they're polycarbonate.

They are, polycarb.

Caleb Sykes

10-04-2014 17:35

Re: Double sided intake club

Anyone want to make a polycarb arm club? :rolleyes:

Michael Corsetto

10-04-2014 17:45

Re: Double sided intake club

Quote:

Originally Posted by inkling16 (Post 1372232)

Anyone want to make a polycarb arm club? :rolleyes:

We'll call it the Team 16 Tribute Club.

Infinator10

10-04-2014 18:12

696 checking in! Front and back intake with a 3 ball auto. Not the original design, but ended up being implemented after CVR for LAR

Abhishek R

10-04-2014 18:17

Re: Double sided intake club

Quote:

Originally Posted by Aidan H. (Post 1372230)

Also 624! Though it seems they haven't utilized them for a 3 ball auto... Yet... (They are probably limited by their catapult's recharge speed and their routine of getting double hot goal)

We actually changed the catapult design slightly at Alamo which made it difficult to compress the ball through the back. (We can't get the 3 shots because of the recharge time anyway, you're right, but it's nice not to need a winch or anything extra to bring it down, just gravity.) We changed the back pickup for Orlando into a 33-inspired "halo" to keep the ball in place and not moving around.

Cam877

10-04-2014 19:39

Re: Double sided intake club

Team 3132 has it too.

mman1506

10-04-2014 19:50

Re: Double sided intake club

We have them, unfortunately they never worked properly at our regionals and we won't be running them at champs. https://www.youtube.com/watch?v=kmM2E5Bx8Pk

mrnoble

10-04-2014 20:01

Re: Double sided intake club

Quote:

Originally Posted by topgun (Post 1372128)

Actually Caleb you weren't the only one at 10K Lakes. We do double side intake, but without two intakes. Our robot is symmetric so we can put the vacuum down on either side of the robot.

We are the same, but with a wheeled intake/shooter. Symmetry Club!

Dominick Ferone

10-04-2014 21:37

Re: Double sided intake club

5030 has 2 side intakes with wheels.

echin

10-04-2014 21:59

Re: Double sided intake club

3467 has one. Reveal video here:https://www.youtube.com/watch?v=8EVAaAPrZG4

barn34

10-04-2014 23:14

Re: Double sided intake club

Of course you can't forget 254. Don't think I saw anyone mention the poofs yet.

cadandcookies

10-04-2014 23:42

Re: Double sided intake club

Quote:

Originally Posted by barn34 (Post 1372413)

Of course you can't forget 254. Don't think I saw anyone mention the poofs yet.

Except in the first post.

barn34

10-04-2014 23:45

Re: Double sided intake club

Quote:

Originally Posted by cadandcookies (Post 1372423)

Except in the first post.

And....yep, I'm dumb. Appologies for my apparent blindness. Lol

RoboChair

11-04-2014 00:51

Re: Double sided intake club

1678 is a 3 position intake with Polycarb arms, front down, back down, and top intake when both are up.

All times are GMT -5. The time now is 17:05.