Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Something FRC GDC could learn from VRC GDC (http://www.chiefdelphi.com/forums/showthread.php?t=129091)

IndySam 25-04-2014 22:14

Something FRC GDC could learn from VRC GDC
 
From the manual for the new VRC game Skyrise:

General Game Rules
<G1> When reading and applying the various rules in this document, please remember that common sense always applies in the VEX Robotics Competition.

dag0620 25-04-2014 22:19

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by IndySam (Post 1378580)
From the manual for the new VRC game Skyrise:

General Game Rules
<G1> When reading and applying the various rules in this document, please remember that common sense always applies in the VEX Robotics Competition.

Times like this you wish CD had a like button.

E Dawg 25-04-2014 22:22

Re: Something FRC GDC could learn from VRC GDC
 
From the FRC game manual:

Quote:

When reading these rules, please use technical common sense.

bduddy 25-04-2014 22:51

Re: Something FRC GDC could learn from VRC GDC
 
"Common sense" should very rarely have to come into play when reading a rulebook.

scca229 25-04-2014 23:26

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by bduddy (Post 1378591)
"Common sense" should very rarely have to come into play when reading a rulebook.

Would you rather the rule book turn into one used for most motor sports and state something like:

Code:

If the rules do not explicitly say that you CAN do something, then you CANNOT.
As a participant in several different motor sports disciplines over the years, I know that I wouldn't as that would pretty much turn FRC into a spec-bot competition and you might as well not have a build season. The KOP would be the entire bot, build using the step-by-step instructions. The team with the best driver wins, assuming it isn't fully autonomous at that point. Not to mention the thread count on CD was grow exponentially due to the complaining...

I don't think it is hard at all to just follow the guidelines in the rule book with some common sense and stop trying to look for little holes to exploit. The referee penalty list is a great example of the "feature creep" that happens in a white list rule book.

I think the biggest problem is that way too many teams have engineers and mentors doing most of the actual build to the point where during inspections, the kids kepp turning to the adults present because the kids didn't have a clue as to what the functions were of the various systems when asked by the inspector (me for one event this year). I personally think only students should be allowed in the inspection area just like the question box, but that is for another post.

EricH 25-04-2014 23:32

Re: Something FRC GDC could learn from VRC GDC
 
One of my favorite rules in an engineering competition (this one courtesy of SAE Aero Design) is something to the effect of: "Violations of the spirit of a rule are counted as violations of the rule."

In FRC, it is occasionally possible to have a play, strategy, or design that is within the letter of the rules, but not the spirit of the rules. Be interesting to see what would happen if the above were put in play in FRC...

mrnoble 25-04-2014 23:47

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by scca229 (Post 1378602)

I think the biggest problem is that way too many teams have engineers and mentors doing most of the actual build to the point where during inspections, the kids kepp turning to the adults present because the kids didn't have a clue as to what the functions were of the various systems when asked by the inspector (me for one event this year). I personally think only students should be allowed in the inspection area just like the question box, but that is for another post.

That is a mighty big assumption. Many of my students specialize. Some adults (judges, if I recall) came by our pit in Denver and started asking students about the design. As it happened, the students manning the pit at that moment were our head cheerleader and two who designed our website. They had no idea what to say about the robot. Our mech students don't program, and our CAD students don't usually build. Et cetera. I'm willing to bet that this is pretty common among teams with more than 10 kids on them.

scca229 26-04-2014 00:42

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by mrnoble (Post 1378609)
That is a mighty big assumption. Many of my students specialize. Some adults (judges, if I recall) came by our pit in Denver and started asking students about the design. As it happened, the students manning the pit at that moment were our head cheerleader and two who designed our website. They had no idea what to say about the robot. Our mech students don't program, and our CAD students don't usually build. Et cetera. I'm willing to bet that this is pretty common among teams with more than 10 kids on them.

I cannot speak for when the judges come around as we all know that is random and always seems to happen at the worst possible times. I can only speak for myself regarding my event as an inspector. Wouldn't you expect the student team members that accompany the robot to inspection to be ones that would be able to explain when asked about something on the robot? Based on your reply, maybe I'm expecting too much organization from most teams although it sounds like organization is a baseline for yours.

beckyc4841 26-04-2014 01:48

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by mrnoble (Post 1378609)
That is a mighty big assumption. Many of my students specialize. Some adults (judges, if I recall) came by our pit in Denver and started asking students about the design. As it happened, the students manning the pit at that moment were our head cheerleader and two who designed our website. They had no idea what to say about the robot. Our mech students don't program, and our CAD students don't usually build. Et cetera. I'm willing to bet that this is pretty common among teams with more than 10 kids on them.

I think the best way to avoid this is keeping the students that have not worked on the robot and may not know as much in the stands doing other thing ex: scouting or cheering. I know for us we only had kids in the pit and with the robot that worked on and knew more about the robot. We have a team of close to 15 and only about 5 or 6 were in the pit.

dtengineering 26-04-2014 01:49

Common sense ain't that common.



Both VRC and FRC do an excellent job of writing rules and replying to questions. Unfortunately neither of them defines whose version of common sense or interpretation of the spirit of the rules is to be applied.



I like my rules to be explicit, thanks.



Jason

bduddy 26-04-2014 02:58

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by mrnoble (Post 1378609)
That is a mighty big assumption. Many of my students specialize. Some adults (judges, if I recall) came by our pit in Denver and started asking students about the design. As it happened, the students manning the pit at that moment were our head cheerleader and two who designed our website. They had no idea what to say about the robot. Our mech students don't program, and our CAD students don't usually build. Et cetera. I'm willing to bet that this is pretty common among teams with more than 10 kids on them.

I'd like to think that, regardless of whether your team members are pit crew, web team, or "cheerleaders" (really?), they should have at least a general knowledge of the robot. Obviously no one can know everyone about the robot, but I'm sure the judges wouldn't expect your web team to, say, describe exactly how you wired your electronics board.

mrnoble 26-04-2014 05:20

Re: Something FRC GDC could learn from VRC GDC
 
We really do have a head cheerleader, as well as a number of other students whose exposure to to the actual robot and it's functions is limited, and who choose to do only financial, decorative, costuming, videography, etc. Anything can be used as a "hook" to give students buy-in and access to a great program like FRC, and it's fun to watch them experience the competition from angles (such as the pit) where they might have limited prior knowledge. Hopefully next year, they will come back with interest in the deeper parts of robotics.

It may be fair to expect that the students accompanying the robot to inspection be able to answer technical questions. And it is fair to say that some teams have mentor-built robots (which,as we all know, is allowed and is a source of perpetual contention in FRC). I just don't think that mentor-built is the norm or the majority, and I also think that my anecdotal experience of having less knowledgable students floating around our inspections (which were 80% done in our pit this year) tells me that "mentor built" is not the only reason why a student can't answer questions about the robot.

cbale2000 26-04-2014 11:44

Re: Something FRC GDC could learn from VRC GDC
 
Honestly, when it comes to inspections, I don't think it should matter who is talking to the inspector. The goal of inspections should be to get the robot checked for rule compliance as quickly and as accurately as possible. Leave student-only quiz time for the judges.

[/2 cents]

Daniel_LaFleur 26-04-2014 20:24

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by EricH (Post 1378604)
One of my favorite rules in an engineering competition (this one courtesy of SAE Aero Design) is something to the effect of: "Violations of the spirit of a rule are counted as violations of the rule."

In FRC, it is occasionally possible to have a play, strategy, or design that is within the letter of the rules, but not the spirit of the rules. Be interesting to see what would happen if the above were put in play in FRC...

One persons innovative approach is another persons 'violation of the spirit of the rule'.

Sorry, I prefer my rules to be explicit, and not interpreted.

EricH 26-04-2014 20:33

Re: Something FRC GDC could learn from VRC GDC
 
Quote:

Originally Posted by Daniel_LaFleur (Post 1378893)
One persons innovative approach is another persons 'violation of the spirit of the rule'.

Sorry, I prefer my rules to be explicit, and not interpreted.

To be fair, the rules were pretty clear (another thing certain folks need to work on), and if there was a question of intent/spirit, you asked the rules committee directly (and knew who they were!) and publicly, and got the same type of response back, usually within a day or so unless it was a particularly complicated one or you were being difficult. None of this "We cannot perform design reviews" non-answer (or "See the definition of possession"--which is what I just asked about!).


All times are GMT -5. The time now is 02:16.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi