Chief Delphi - VIAIR 250C-IG Compressor

Page 5 of 5

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - VIAIR 250C-IG Compressor (http://www.chiefdelphi.com/forums/showthread.php?t=129321)

adciv

25-05-2014 15:29

Re: VIAIR 250C-IG Compressor

You could probably use a pressure transducer and a known volume of airtanks to come up with a good estimation of flow rates for a compressor.

ArtemusMaximus

04-06-2014 12:15

Re: VIAIR 250C-IG Compressor

Quote:

Originally Posted by adciv (Post 1387326)

You could probably use a pressure transducer and a known volume of airtanks to come up with a good estimation of flow rates for a compressor.

I think this method would be of somewhat limited usefulness.

jimbo493

04-06-2014 17:16

Re: VIAIR 250C-IG Compressor

The leader line actually looks quite useful. This year we had a few pneumatics leaks and didn't realize until someone pointed out the compressor has been running like nonstop. Eventually the hose off the compression had melted down a little and make the leak much bigger.

skottmorris

01-04-2015 13:13

Re: VIAIR 250C-IG Compressor

1 Attachment(s)

If anyone needs the CAD file for this compressor, I have taken the time to clean up the terrible STEP file VIAIR provides. Everything looks good except for the top component. The source STEP file is missing so many surfaces. I tried to get them to create a new STEP file, but did not have any luck. See attached.

All times are GMT -5. The time now is 21:53.

Page 5 of 5

Show 100 post(s) from this thread on one page