Chief Delphi
Page 4 of 4 < 123 4
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Custom West-Coast Design Feedback (http://www.chiefdelphi.com/forums/showthread.php?t=129752)

Andrew Lawrence 16-06-2014 14:41
Re: Custom West-Coast Design Feedback
 
Quote:
Originally Posted by Dunngeon (Post 1390038)
By rocky, I think he means actual rock back and forth due to the drop center. Along the axis of the drop center
Yes, that is what I'm asking.

Chris is me 16-06-2014 14:57
Re: Custom West-Coast Design Feedback
 
Quote:
Originally Posted by Andrew Lawrence (Post 1390078)
Yes, that is what I'm asking.
Yeah, that's what I was referring to. "Rockiness" literally meaning tendency to rock.

RKazmer 23-06-2014 14:46
Re: Custom West-Coast Design Feedback
 
2363 over the past year used a 1/4" holed lexan (the holes were put there in the manufacturing). It was easier for the team to use that for wiring and with weight. In 2013, we used garalite, but found it too fragile and would shatter easily.

notmattlythgoe 24-06-2014 12:33
Re: Custom West-Coast Design Feedback
 
Quote:
Originally Posted by RKazmer (Post 1390819)
2363 over the past year used a 1/4" holed lexan (the holes were put there in the manufacturing). It was easier for the team to use that for wiring and with weight. In 2013, we used garalite, but found it too fragile and would shatter easily.
It was the 1/8" perforated polycarbonate from AndyMark.

RKazmer 25-06-2014 08:14
Re: Custom West-Coast Design Feedback
 
Quote:
Originally Posted by notmattlythgoe (Post 1390981)
It was the 1/8" perforated polycarbonate from AndyMark.
My mistake, I thought we used thicker lexan.


All times are GMT -5. The time now is 01:54.
Page 4 of 4 < 123 4
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi