Chief Delphi - Team 254 - 2014 Build Blog + Tech Binder

Page 3 of 3

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Team 254 - 2014 Build Blog + Tech Binder (http://www.chiefdelphi.com/forums/showthread.php?t=129996)

lgphoneeric

27-07-2014 02:15

Re: Team 254 - 2014 Build Blog + Tech Binder

So is there any chance you guys will release the cad files for this years robot? It would be amazing to be able to check it out on CAD. :]

Cory	27-07-2014 14:22

Re: Team 254 - 2014 Build Blog + Tech Binder

Quote:

Originally Posted by thatprogrammer (Post 1394408)

Sorry for asking this a while after this was released. I've noticed you guys have mentioned you needed to be creative to get tubing on your intakes. How was this actually done on the finished robot?

Colin and Andrew already answered, but another good trick for getting tubing onto a shaft is to coat the inside with plain old rubbing alcohol. It makes it slide better and will evaporate when you're done and everything is on there.

All times are GMT -5. The time now is 13:48.

Page 3 of 3

Show 100 post(s) from this thread on one page