Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Most Commonly Used Aluminum Extrusion Profiles (http://www.chiefdelphi.com/forums/showthread.php?t=130080)

TedG 25-07-2014 11:07
Re: Most Commonly Used Aluminum Extrusion Profiles
 
In my past experiance with BERT 133, and what I know they used last year besides KoP extrusions:
  1. L1x1x.125
  2. L1x.75x.125
  3. 1x1x.0625 TUBE
  4. 1x1 80/20 TUBE
  5. .25" ALUM PLATE
And of course larger alum plate thickness' machined as required for brackets, mounts, etc:
.375"
.5"
.625"

Oblarg 27-07-2014 11:46
Re: Most Commonly Used Aluminum Extrusion Profiles
 
Quote:
Originally Posted by TedG (Post 1394328)
In my past experiance with BERT 133, and what I know they used last year besides KoP extrusions:
  1. L1x1x.125
  2. L1x.75x.125
  3. 1x1x.0625 TUBE
  4. 1x1 80/20 TUBE
  5. .25" ALUM PLATE
And of course larger alum plate thickness' machined as required for brackets, mounts, etc:
.375"
.5"
.625"
Out of curiosity, what on earth would you need to make out of .625'' aluminum sheet? That's rather overkill for FRC, I'd think. I seldom use anything above .25''.


All times are GMT -5. The time now is 01:42.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi