Chief Delphi - Roborio CAN

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - Roborio CAN (http://www.chiefdelphi.com/forums/showthread.php?t=130098)

gagnem09

18-07-2014 14:35

Roborio CAN

I have some J1939 compatible sensors. Will these be usable with the Roborio's CAN bus?

Thanks

RufflesRidge

18-07-2014 14:48

Re: Roborio CAN

It seems likely that the roboRIO CAN bus will be run at the max 1Mbit rate so I would guess no.

jhersh

19-07-2014 09:25

Re: Roborio CAN

That is correct. The roboRIO CAN bus will run only at 1Mb/s. In addition, the can nodes that must be on the bus follow an incompatible addressing format that would interfere with and be interfered with by J1939 devices. The port itself is capable of talking to them, tho. Just not in an FRC environment.

All times are GMT -5. The time now is 20:05.