Chief Delphi - pic: Fun Bevel Gearbox Idea

Page 3 of 3

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Fun Bevel Gearbox Idea (http://www.chiefdelphi.com/forums/showthread.php?t=130525)

Bryce2471

15-09-2014 02:13

Re: pic: Fun Bevel Gearbox Idea

Quote:

Originally Posted by sanddrag (Post 1399953)

Can you comment on what exact gears you would use if you were to make this?

I cant say for sure, I already had the CAD for these bevel gears sitting around in my computer. Although, I think the model originally cam from a QTC online catalog, so you could probably buy them there.

JustPlyZ

16-09-2014 10:18

Re: pic: Fun Bevel Gearbox Idea

Quote:

Originally Posted by Chadfrom308 (Post 1399986)

We had 4 CIMs/4 Mini-CIMs on our drivetrain and didn't ever pop the breaker. That being said, we got a little lucky

We've had 6 CIMs/ and 2 mini CIMs,
4 of the CIMs were powering our drive and 2 CIMs + 2 minis were powering out shooter, we have yet to pop a breaker. :)

R.C.	16-09-2014 15:46

Re: pic: Fun Bevel Gearbox Idea

Quote:

Originally Posted by JustPlyZ (Post 1400242)

We've had 6 CIMs/ and 2 mini CIMs,
4 of the CIMs were powering our drive and 2 CIMs + 2 minis were powering out shooter, we have yet to pop a breaker. :)

That's not the same as all motors in drive...

Chadfrom308

17-09-2014 08:01

Re: pic: Fun Bevel Gearbox Idea

Quote:

Originally Posted by JustPlyZ (Post 1400242)

We've had 6 CIMs/ and 2 mini CIMs,
4 of the CIMs were powering our drive and 2 CIMs + 2 minis were powering out shooter, we have yet to pop a breaker. :)

We also had 2 CIMs on our thrower

Bryce2471

17-09-2014 13:39

Re: pic: Fun Bevel Gearbox Idea

Quote:

Originally Posted by Chadfrom308 (Post 1400358)

We also had 2 CIMs on our thrower

Wow! that's a lot of CIMs.

I just realized that over 25 lbs of you robot was made up of CIM motors. :ahh:
At least 21% of you robots mass was CIM motors.

All times are GMT -5. The time now is 22:15.

Page 3 of 3

Show 100 post(s) from this thread on one page