Chief Delphi - MXP Breakout Boards

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - MXP Breakout Boards (http://www.chiefdelphi.com/forums/showthread.php?t=130695)

RufflesRidge

11-10-2014 11:47

Re: MXP Breakout Boards

Quote:

Originally Posted by John Leonard (Post 1403861)

Is the creation of the board prior to Kick-Off in violation of the build rules?

-JL

Per 2014 rules you would have to post the design publicly before kickoff and make the board after.

Note about 2015 rules being subject to change goes here.

Tom Line

11-10-2014 13:44

Re: MXP Breakout Boards

Quote:

Originally Posted by RufflesRidge (Post 1403862)

Per 2014 rules you would have to post the design publicly before kickoff and make the board after.

Note about 2015 rules being subject to change goes here.

If they plan on offering the board as a Cots product then they can make them now.

RufflesRidge

11-10-2014 14:07

Re: MXP Breakout Boards

Quote:

Originally Posted by Tom Line (Post 1403870)

If they plan on offering the board as a Cots product then they can make them now.

Correct, but to do so it has to be an entity other than the team (see the definitions of COTS and VENDOR)

DrDoug

29-10-2014 21:24

Livonia Warriors are offering MXP Breakout Boards for purchase

The Livonia Warriors FRC Team 2832 has developed a break-out board that fits snugly on the roboRIO controller to provide access to the MXP port. If interested in more details please view the flyer available at: https://drive.google.com/file/d/0B_N...ew?usp=sharing

We used it successfully on our robot during an off-season competition for Beta-testing to roboRIO.

Thanks for looking and good luck to your team in 2015!

All times are GMT -5. The time now is 20:31.

Page 2 of 2

Show 100 post(s) from this thread on one page