Chief Delphi - Charging station for the stands

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Charging station for the stands (http://www.chiefdelphi.com/forums/showthread.php?t=130768)

fb39ca4

12-10-2014 17:38

Re: Charging station for the stands

You just need a 5V DC voltage regulator that will take a 12V input. Most car chargers do exactly this.

AdamHeard

12-10-2014 17:44

Re: Charging station for the stands

We keep it all DC as well.

you can get fairly inexpensive 12V chargers for most laptops, and you obviously can get 12V based usb outlets.

We charger several laptops and many USB based devices w/ no inverter.

Al Skierkiewicz

13-10-2014 07:32

Re: Charging station for the stands

Mike,
Insulate the terminals on top of the battery shown in your picture above. Any metal dropped into your case is a hazard.

Mike Marandola

13-10-2014 09:17

Re: Charging station for the stands

Quote:

Originally Posted by Al Skierkiewicz (Post 1404040)

Mike,
Insulate the terminals on top of the battery shown in your picture above. Any metal dropped into your case is a hazard.

Thank you Al. We will make sure to do that at our next meeting.

All times are GMT -5. The time now is 06:29.

Page 2 of 2

Show 100 post(s) from this thread on one page