pic: Team 2950 Devastators WCD
 

Here is the CAD if you are interested in seeing it, sorry it is very unorganized.

Re: pic: Team 2950 Devastators WCD
 

Looks very nice but I would have to say two things. First being that you are probably going to want to support the face of your gearbox more, you do not want that twisting to torquing. Second I love the milled team name, don't get me wrong, but it will just get covered by the bumpers and now you have just made a weaker beam for something most will never see. Just my $0.02 but overall it looks very nice.

Re: pic: Team 2950 Devastators WCD
 

Nice WCD.

A suggestion. Those bumper mounts will be very low. you will only get about an inch of actual material behind the 5 " bumper. We built a very similar drive last season.

http://www.chiefdelphi.com/media/photos/39228

A lot was changed internally but the frame shown is basically what we built.

Luckily the upper frame that held our pick up and catapult provided addition backing to the upper portion of the bumper. Something to think about.

Other wise a great iteration, looking forward to more.

Re: pic: Team 2950 Devastators WCD
 

If you guys would like any help with Solidworks feel free to message me, I would be more than willing to help.

Re: pic: Team 2950 Devastators WCD
 

We did a very similar drivetrain in 2013 (so much so that we had the tube between the wheels, although ours was 8 wheel drop) and had a horrible time with warping and flexing. We actually weren't able to drive in a straight line towards the end of it's life. In 2014 we moved back to our beloved 6 wheel drop and added a top structure. It has been the most solid frame we've ever built just because of the second structural layer.

Re: pic: Team 2950 Devastators WCD
 

Happy to see your SOLIDWORKS model.

You can take a look at the Blue Cheese model we redid at www.solidworks.com/FIRST

Dividing into subassemblies will help you in organization. Also, download our revised 2014 kop. Use Add File Locations in SolidWorks Resources and browse to the downloaded components to see the all the models that we have created.

Here are some tutorials to help https://www.youtube.com/watch?v=ogKY...W-gEKDxfWgShwG

There are many people on CD that are very knowledgeable on SOLIDWORKS.

Well done- keep modeling. Marie

Re: pic: Team 2950 Devastators WCD
 

Here is an image of our 2014 WCD

As you can see, there are two levels with bracing and gussets in between. The lower level is very similar to the chassis safiq10 posted but with the addition of the top level we have achieved greater stiffness and resistance to torquing and flexing that a single layer is prone to. The second level additionally provides a good area for bumper mounting.

Re: pic: Team 2950 Devastators WCD
 

How much did your chassis weigh?

Re: pic: Team 2950 Devastators WCD
 

Thank you for all the kind words and advice! This is our very first time working in Solidworks we greatly appreciate all the advice. To address some questions

1. This hopefully will be our demo robot, so we have a tendency to not want to put on bumpers on our robot.
2. After looking at other teams robot and your advice I plan on adding a top structure similar to Team Driven and 1817.
3. We are still confused on how to attach manipulators. If you have any advice or could point us in the right direction that would be wonderful!

Once again thank you so much for advice. Hopefully we will have something up and running by the end of the month. We will definitely keep the community updated on our works.

Re: pic: Team 2950 Devastators WCD
 

I don't remember specifics but without wheels and hardware and 3 CIM ball shifters I believe we sat at about 20lbs

Re: pic: Team 2950 Devastators WCD
 

Thanks to everyone who has helped us out so far! Here is our updated CAD and here is a rendered picture of it. We believe we are nearing completion but we would like the advice of the CAD gurus on CD. So what do you guys think? Is there anything you think we should change?

Re: pic: Team 2950 Devastators WCD
 

It looks like you are using shaft collars to old the wheels on. I would strongly encourage not doing that. Use e-clips, snap rings, or bolts threaded onto the end. shaft collars will slide off almost immediately. Other then that, it looks like a great start.

Re: pic: Team 2950 Devastators WCD
 

Well that is slightly embarrassing. On the outer wheels there is suppose to be a bolt at the end. I'll definitely look into using snap rings though. Thanks for the advice!

Re: pic: Team 2950 Devastators WCD
 

In my experience, this is not true.

Be sure you use clamping shaft collars rather than set-screw ones. I have never had problems with properly-tightened clamping shaft collars moving in an FRC drive train.

449 ran a WCD with shaft collars retaining the wheels all of last year without any problems.

Re: pic: Team 2950 Devastators WCD
 

*Disclaimer: Another anecdote*

687 also ran a WCD with clamping shaft collars this past season "without issues" to my knowledge. I mean, there were plenty of issues with the drive, but clamping collars were not among them. :p