Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: new shoes (http://www.chiefdelphi.com/forums/showthread.php?t=131140)

mman1506 18-11-2014 23:18

Re: pic: new shoes
 
Quote:

Originally Posted by JesseK (Post 1408907)
I'm not sure it's worth it to bring a compressor tank & air rivet gun to competition just for tread rivets, so we'll have to see what else we can rivet this season if the air rivet gun works so well we decide to go that route.

Plug a air line into the robot's compressed air release valve and connect the other end to the riveter. Problem solved.

g_sawchuk 19-11-2014 07:56

Re: pic: new shoes
 
Wow, someone sure has been using those wheels. We had a demo on pavement, but we limited skid turns, so by the end, they were only a bit worn down. Then we replaced them for an off season event.

Andrew Schreiber 19-11-2014 17:36

Re: pic: new shoes
 
Quote:

Originally Posted by cgmv123 (Post 1409131)
There shouldn't be as much debate as there is; all the inspectors say "don't bring a non-robot compressor".

EDIT: *Ducks*

This is absolutely incorrect. There was NOT a rule in the books to forbid it. They can ask you not to run your shop compressor due to power concerns and you are absolutely not allowed to fill up your robot tanks from it. But there is NOT a rule saying it cannot be in the pits.

Richard Wallace 19-11-2014 21:39

Re: pic: new shoes
 
My those treads are worn. Good thing you know how to replace them, quickly.

----

Re: thread hijack to pit compressors -- at many events where I have volunteered, the people responsible for pit power want to know which teams have compressors. For example, at St. Joseph last year, we kept an inspector assigned to watch teams unloading and check for pit compressors. This was NOT motivated by suspicion that such teams might use pit compressors to fill pneumatic storage tanks before a match. It was motivated by a strong desire to keep pit power in service all the time, even if that meant juggling pit assignments so that the number of compressors on any one distribution circuit did not get too high. Fortunately, we did not need to move any teams or ask them to refrain from using pit compressors. I have been at events in past years where one or both of those things did occur.

Most of the pit compressors I have seen teams use at FRC events were rated for 15A current draw. That in itself is not much of a problem; however, many of these things draw much larger surge current when they start (I have measured up to 50A for a split-second) and THAT can push an already loaded distribution breaker past its trip point, knocking out power to a row of pits. Then the roadies have to scurry ...:o


All times are GMT -5. The time now is 03:36.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi