Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

What is Chezy drive?

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

Its a modified arcade drive. They use 2 separate joysticks. One to control throttle, and one to control turning. Some math actually changes the turning ratio so the robot turns in smooth arcs instead of sharp corners like standard arcade drive would. This makes full speed sweeping turns much easier, which makes the robot more controllable.

Their implementation can be found here.

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

That is essentially what we use but I just called it halo drive. I might just implement the "smooth arc" changes to our drive though to see what that is like.

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

do you have video of the drive running?

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

Of our prototype drive, yes. Our video guy won't be able to render it immediately though :/

And just a linear drive is a bit to uncontrollable, so we are going to try to test out some different math functions for the different gears and see what handles the best.

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

How do you guys hold the wheels on to the shafts at the end? I'm designing a WCD for our team and was curious how other teams accomplished this.

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

Our team, and I'd imagine most teams, uses snap rings.

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

Really? That's what i have in the CAD now, but I was told that those might not hold up under the force of the wheel trying to push off the shaft. Any specific type? Thanks!

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

We use klip rings which are a brand name type ring. They are a special type of e-clip but easy to put on and take off with a screwdriver.
Here is the link to them:
www.mcmaster.com/#98420a138/=uzrf5a

Re: pic: KING TeC Drivetrain Prototype - All Wired Up!
 

They are rated for a lot of force, and unless the snap ring is damaged by deforming too much during installation (easy to avoid with proper snap ring pliers) they are plenty for the job.