Re: VEXpro 2015 Product line launch
 

The drawing on the Vexpro.com site shows the CAN wire as 22AWG as opposed to 20AWG. Is the spec different on different drawings by chance?

The 22AWG drawing is located here - http://content.vexrobotics.com/vexpr...g-20150120.PDF

We just want to be sure of the correct wire gauge.

Re: VEXpro 2015 Product line launch
 

The SRX uses 22 AWG.

Re: VEXpro 2015 Product line launch
 

Awesome, thanks!

Re: VEXpro 2015 Product line launch
 

I hate to resurrect this thread, but is there going to be a new product launch this year?

Re: VEXpro 2015 Product line launch
 

I have been wondering the same thing.

Re: VEXpro 2015 Product line launch
 

Dec 10th
https://twitter.com/VEXRobotics/stat...26952206155776

Re: VEXpro 2015 Product line launch
 

Any idea as to what they will be releasing or upgrading?

Re: VEXpro 2015 Product line launch
 

I would presume that's what we'll find out on the 10th.

Re: VEXpro 2015 Product line launch
 

Swerve drive - 6 wheels!

Re: VEXpro 2015 Product line launch
 

Also anybody know about the VEX speed controller voucher described in this blog post?
http://archive.usfirst.org/roboticsp...or-controllers

Might the info be released with the line launch? We are holding off on our big preseason parts order until then, would like to cover some of the speed controllers in that order.

To me it seems like the voucher will come in the KOP.

Re: VEXpro 2015 Product line launch
 

Yay! http://www.chiefdelphi.com/forums/sh...hreadid=140161

Re: VEXpro 2015 Product line launch
 

Aren,

14-838288 and 14-868380 are part numbers listed on Cross the Road electronics website to the Victor SP and Talon SRX.
http://www.ctr-electronics.com/contr...talon-srx.html
http://www.ctr-electronics.com/contr...victor-sp.html

Just noticed a new product from Cross the Road though!
HERO Development Board $59 :
http://www.ctr-electronics.com/control-system/hro.html