Originally Posted by Aren_Hill (Post 1415269)

The wire spec is 20AWG per the drawing on the site, the twist spec we use is 1 revolution per 14-21mm.

-Aren

Originally Posted by Jared (Post 1415172)

The output shafts and shifting dogs for the WCP DS gearbox seem to be dead links right now. Do you still plan to sell the output shafts and shifting dogs separately?

Also, can the shorter steel shaft that fits inside the gearbox output shaft be purchased separately too?

Originally Posted by Aren_Hill (Post 1415284)

The Shifter rod has been added to the 217-3628 Shifter dog Kit.
http://www.vexrobotics.com/217-3628.html

And yes the shifter output shaft will still be available by itself.
http://www.vexrobotics.com/217-3635.html

-Aren

Originally Posted by Aren_Hill (Post 1415284)

The Shifter rod has been added to the 217-3628 Shifter dog Kit.
http://www.vexrobotics.com/217-3628.html

And yes the shifter output shaft will still be available by itself.
http://www.vexrobotics.com/217-3635.html

-Aren

Originally Posted by Mr V (Post 1414848)

I have found that Nylock nuts and bolts do not vibrate loose in FRC applications and if there is a situation where a Nylock is not suitable then we use medium strength thread locker. Once I introduced thread locker to the team there have not been any instances were a fastener came loose.

Where to you find rivet nuts that go in a 1/4" hole all the ones I've ever found use the annoying 19/64" bit. Because it is a less than common size we keep it in the kit with the rivet nuts so it is there when we need it.

Originally Posted by RoboChair (Post 1416246)

Our 2007 Aim high robot vibrated 1/4-20 nylon lock nuts off... multiple times...

Originally Posted by ToddF (Post 1419255)

Now, if you would just get 2 CIM ball shifters in stock...

Originally Posted by notmattlythgoe (Post 1510349)

I hate to resurrect this thread, but is there going to be a new product launch this year?

Originally Posted by notmattlythgoe (Post 1510349)

I hate to resurrect this thread, but is there going to be a new product launch this year?

Originally Posted by Owen Busler (Post 1510417)

Any idea as to what they will be releasing or upgrading?

Originally Posted by Aren Siekmeier (Post 1510610)

Also anybody know about the VEX speed controller voucher described in this blog post?
http://archive.usfirst.org/roboticsp...or-controllers

Might the info be released with the line launch? We are holding off on our big preseason parts order until then, would like to cover some of the speed controllers in that order.

Originally Posted by Aren Siekmeier (Post 1510610)

Also anybody know about the VEX speed controller voucher described in this blog post?
http://archive.usfirst.org/roboticsp...or-controllers

Might the info be released with the line launch? We are holding off on our big preseason parts order until then, would like to cover some of the speed controllers in that order.

Originally Posted by Aren Siekmeier (Post 1511066)

Yay! http://www.chiefdelphi.com/forums/sh...hreadid=140161