pic: 3206 Chassis on the Beach
 

Re: pic: 3206 Chassis on the Beach
 

I love the render, Autodesk always seems to look so nice!

How are your 80/20 pieces attached to each other? I can't see anything in the render but I am assuming that there is some bracket on the inside corners.

Re: pic: 3206 Chassis on the Beach
 

Are you at all concerned about bending your axle shafts during matches? What do you plan to use this for?

Re: pic: 3206 Chassis on the Beach
 

It looks like there is some kind of support right next to the wheel that should prevent this (look on the far side).

Re: pic: 3206 Chassis on the Beach
 

There are 3/16 aluminum gusset plates on the bottom where the 80/20 pieces connect and two hole corner brackets on the outside part of the double wide pieces of 80/20 that spans the length of the robot.

Re: pic: 3206 Chassis on the Beach
 

lopsided98 is correct, there are 3/16 aluminum plates that hold the bearings on both sides of the double wide 80/20. Some are hidden behind the wheels from this point of view.

Re: pic: 3206 Chassis on the Beach
 

This looks good. The render brings a new meaning to West Coast Drive.

Re: pic: 3206 Chassis on the Beach
 

Here is the .stp file: https://drive.google.com/file/d/0B-z...ew?usp=sharing