Chief Delphi - Team 701's Robot Reveal Teaser/Test

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Team 701's Robot Reveal Teaser/Test (http://www.chiefdelphi.com/forums/showthread.php?t=131902)

bEdhEd

03-01-2015 01:33

Team 701's Robot Reveal Teaser/Test

I started work on my team's robot reveal video for the 2015 season. After seeing the 2014 Alberta Tech Alliance Robot Reveal video, I wanted to see if I could emulate what was created by Edge Point Productions.

Over the years, robot reveal videos have gotten increasingly high in quality, and I'd like everyone to keep that up, including my team! Here it is:

https://www.youtube.com/watch?v=q2iMulBhItA

For anyone wondering, what I used for the smooth panning was not an actual camera track, but instead a Rotatrim paper cutter that we have at our facility.

asid61

03-01-2015 02:29

Re: Team 701's Robot Reveal Teaser/Test

Looks really good video-wise, although that chopsaw is running kinda slow IMO.

bEdhEd

03-01-2015 03:06

Re: Team 701's Robot Reveal Teaser/Test

Quote:

Originally Posted by asid61 (Post 1419525)

Looks really good video-wise, although that chopsaw is running kinda slow IMO.

The frame rate of the video makes it look slow. Kinda like when you see car wheels rotate in a video.

asid61

03-01-2015 04:25

Re: Team 701's Robot Reveal Teaser/Test

Quote:

Originally Posted by bEdhEd (Post 1419529)

The frame rate of the video makes it look slow. Kinda like when you see car wheels rotate in a video.

I mean cutting too slowly for an aluminum angle of that size.

bEdhEd

03-01-2015 08:33

Re: Team 701's Robot Reveal Teaser/Test

Quote:

Originally Posted by asid61 (Post 1419534)

I mean cutting too slowly for an aluminum angle of that size.

Considered. I can't tell from this video how fast the saw is actually going, so I wouldn't know if it were too slow.

All times are GMT -5. The time now is 05:59.