![]() |
pic: 2015 WCD Clearance Considerations
|
Re: pic: 2015 WCD Clearance Considerations
just to verify what is this exactly depicting a robot driving over the humps.
|
Re: pic: 2015 WCD Clearance Considerations
Seems like 6" wheels and 2" tube are pretty much gonna handle anything the bump can throw at it, which is nice.
![]() |
Re: pic: 2015 WCD Clearance Considerations
I think the point is to Not drive over the scoring platforms. Thats why maneuverability is key this year.
|
Re: pic: 2015 WCD Clearance Considerations
Quote:
|
Re: pic: 2015 WCD Clearance Considerations
Quote:
Also, they put ramps on them, so they clearly thought that teams would want to drive over them. |
Re: pic: 2015 WCD Clearance Considerations
Quote:
|
Re: pic: 2015 WCD Clearance Considerations
Quote:
|
Re: pic: 2015 WCD Clearance Considerations
Quote:
|
Re: pic: 2015 WCD Clearance Considerations
e: nvm. please delete
|
Re: pic: 2015 WCD Clearance Considerations
Quote:
|
Re: pic: 2015 WCD Clearance Considerations
.25 is plenty, but mine will have a wheel or 2 between those two, so no problem. pretty sure 4" wheels would work fine too:)
|
Re: pic: 2015 WCD Clearance Considerations
Quote:
|
Re: pic: 2015 WCD Clearance Considerations
Depending on the length of your base, you actually can get away with 4" wheels traveling over the platforms. However, with a WCD, you'll need 6" wheels in case you catch the corner of the scoring platform with the front of the drivebase or if you want to drive along the length of the platform.
In short, going with 6" wheels is probably the better option. |
Re: pic: 2015 WCD Clearance Considerations
Can someone just verify that 1in is enough clearance to not have to worry about the bump?
|
| All times are GMT -5. The time now is 01:16. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi