Chief Delphi - Looking for PDF of Robot power and robot signal schematics

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Looking for PDF of Robot power and robot signal schematics (http://www.chiefdelphi.com/forums/showthread.php?t=132186)

Alex_Ibarra

05-01-2015 19:43

Looking for PDF of Robot power and robot signal schematics

Hi, I am a newbie and I am looking for seperate PDF versions of the schematics for the 2015 robot power and robot signal schematics same as they provided in 2014. Thank you for your help!

nickmcski

05-01-2015 23:09

Re: Looking for PDF of Robot power and robot signal schematics

Its not the same but this is a very comprehensive guide on how to wire your robot http://wpilib.screenstepslive.com/s/...control-system

jengl

08-01-2015 21:33

Re: Looking for PDF of Robot power and robot signal schematics

Not a PDF, but our electrical team found this pretty comprehensive.

RufflesRidge

08-01-2015 21:44

Re: Looking for PDF of Robot power and robot signal schematics

Quote:

Originally Posted by jengl (Post 1424677)

Not a PDF, but our electrical team found this pretty comprehensive.

It's also wrong...

That's from a while ago when it was going to be a USB radio. The radio now needs to plug into the VRM 5V2A port and the Ethernet port on the roboRIO and the camera needs an additional VRM or needs to run on the 500mA port.

Mark McLeod

08-01-2015 22:03

Re: Looking for PDF of Robot power and robot signal schematics

Here's an unofficial photoshopped updated conceptual layout.
However, it shows the DLink sharing a VRM with an IP camera and we aren't doing that for competition.

Cecil

08-01-2015 23:04

Re: Looking for PDF of Robot power and robot signal schematics

Quote:

Originally Posted by RufflesRidge (Post 1424683)

It's also wrong...

That's from a while ago when it was going to be a USB radio. The radio now needs to plug into the VRM 12V2A port and the Ethernet port on the roboRIO and the camera needs an additional VRM or needs to run on the 500mA port.

Please do NOT plug the robot radio into the 12 volt port on the VRM! The radio needs to be in the 5 volt 2 amp port, marked with a sticker as "Radio Power".

RufflesRidge

09-01-2015 07:34

Re: Looking for PDF of Robot power and robot signal schematics

Quote:

Originally Posted by Cecil (Post 1424744)

Please do NOT plug the robot radio into the 12 volt port on the VRM! The radio needs to be in the 5 volt 2 amp port, marked with a sticker as "Radio Power".

Ahhhhh!!!! Can't believe I typed that. Thanks for the correction, I fixed my post above/

All times are GMT -5. The time now is 11:28.