Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Omni Wheels with KOP Andy Mark Chassis (http://www.chiefdelphi.com/forums/showthread.php?t=132199)

sasha831 07-01-2015 22:24
Re: Omni Wheels with KOP Andy Mark Chassis
 
Quote:
Originally Posted by Mike Marandola (Post 1424014)
What do you mean by height clearance? So it doesn't hit the flanges?
Yes, That is exactly what I mean, Whether the thicker Vex Omni's will fit between the flanges

Mike Marandola 07-01-2015 22:44
Re: Omni Wheels with KOP Andy Mark Chassis
 
1 Attachment(s)
Quote:
Originally Posted by sasha831 (Post 1424049)
Yes, That is exactly what I mean, Whether the thicker Vex Omni's will fit between the flanges
They will be cutting it close. The distance between flanges is 1.75". The center wheel is what would cause an issue since there is not much room to move side to side. I would advise you to assemble it in CAD or contact AM.

Dad1279 19-01-2015 02:09
Re: Omni Wheels with KOP Andy Mark Chassis
 
Quote:
Originally Posted by Mike Marandola (Post 1424060)
They will be cutting it close. The distance between flanges is 1.75". The center wheel is what would cause an issue since there is not much room to move side to side. I would advise you to assemble it in CAD or contact AM.
The Vex 6" Omnis will fit between the flanges, but the KOP spacers need to be changed. I just uploaded the adapter we used to adapt the KOP AM pulley to Vex omni, and space it so the belt clears. http://www.thingiverse.com/thing:642155


All times are GMT -5. The time now is 01:00.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi