Chief Delphi - How to use an old cRIO with a 2015 driver station

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - How to use an old cRIO with a 2015 driver station (http://www.chiefdelphi.com/forums/showthread.php?t=132261)

jhersh

13-01-2015 17:05

Re: How to use an old cRIO with a 2015 driver station

Quote:

Originally Posted by Stuart Hunt (Post 1427593)

Which means we'll have to use the old Driver Station?

Correct.

Jalerre

17-01-2015 11:15

Re: How to use an old cRIO with a 2015 driver station

Does anyone know where we can download the old driver station? We still want to use our old CRio for driver practice but we no longer have any of last year's software. The NI link to last years update says "page not found".

S1nus

17-01-2015 12:34

Re: How to use an old cRIO with a 2015 driver station

Quote:

Originally Posted by Jalerre (Post 1429591)

Bump for this

jhersh

17-01-2015 15:01

Re: How to use an old cRIO with a 2015 driver station

http://download.ni.com/support/softl...eSuite6.00.zip

PrimeMatrix

26-01-2015 17:31

Re: How to use an old cRIO with a 2015 driver station

Thanks for the help guys!

jtaylor991

27-01-2015 20:46

My solution to using the old 8-slot cRIO was to install both last year and this year's software. Just make sure to put them both in separate National Instruments directory trees. I did NI 2014 and NI 2015 as the two. The updates installed fine (well LV 2013 works fine). Both drive stations are installed in Program Files/FRC Driver Station. There will be two versions of every file, just confirm which EXE is which.

Hopefully that is helpful to someone. Good luck!

All times are GMT -5. The time now is 04:53.

Page 2 of 2

Show 100 post(s) from this thread on one page