Chief Delphi - pic: 1/12 Scale Field (2015 Season) #2

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 1/12 Scale Field (2015 Season) #2 (http://www.chiefdelphi.com/forums/showthread.php?t=132380)

pic: 1/12 Scale Field (2015 Season) #2

Re: pic: 1/12 Scale Field (2015 Season) #2

Solidworks can export .stl files, which can be opened in a modeling program like Blender. From there it should be possible to convert to a 3D printer-friendly format.
Thanks for the files though. If we had a 3D printer, we would print this. Very useful for consideration of distances, etc.

Re: pic: 1/12 Scale Field (2015 Season) #2

I'm not sure I could describe this with any word other than: adorable. :rolleyes:

Re: pic: 1/12 Scale Field (2015 Season) #2

Quote:

Originally Posted by asid61 (Post 1424131)

I wasn't the member working with Solidworks at the time, but I was told that it was either when we tried to export to .stl or when we imported to MakerWare that we were given a "Mesh is Damaged" error.

I was working with trying to import the files into Inventor (our team's primary CADing software). I don't believe we ever tried Blender at any point though, but I know that every .x_l or .sat we tried to import to Inventor was either unrepairable or dimensionless.

Still, these should serve as workable, dimensioned Inventor files, and I'll update the dropbox if we're able to import the more official ones.