Chief Delphi - Running PID on Jaguar vs on RoboRIO

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Running PID on Jaguar vs on RoboRIO (http://www.chiefdelphi.com/forums/showthread.php?t=132441)

bmxer51

08-01-2015 20:48

Running PID on Jaguar vs on RoboRIO

Can someone explain what the difference would be between running a PID for speed control on the Jaguar vs on the RoboRIO through LabView? Also, how would the program look different between the two and if we ran it on LabView, what mode setting should we set the Jaguar to?

I'm fairly new to programming, if you need additional information please ask.

Thank you for your help!

cgmv123

08-01-2015 20:57

Re: Running PID on Jaguar vs on RoboRIO

You have much more control if you run it through the RoboRIO than if you run it on the Jaguar. Unlike the Talon SRX, the Jaguar's sensor inputs aren't sent to the controller.

Skyehawk

08-01-2015 21:01

Re: Running PID on Jaguar vs on RoboRIO

You are far better off on the RobotRIO, though the PID on the Jag may be faster.

cgmv123

08-01-2015 21:08

Re: Running PID on Jaguar vs on RoboRIO

Quote:

Originally Posted by Skyehawk (Post 1424648)

the PID on the Jag may be faster.

This may be true, but I don't see it being an issue with the performance improvements of the roboRIO.

All times are GMT -5. The time now is 08:53.