Chief Delphi - My RoboRio needs a doctor

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - My RoboRio needs a doctor (http://www.chiefdelphi.com/forums/showthread.php?t=132544)

EmileH

11-01-2015 15:52

Re: My RoboRio needs a doctor

asnell16,

Have you tried looking at the RoboRIO manual and its LED indicator section?

Confirm your PDP is outputting a proper 6.8-18V output through the CONTROLLER PWR port with a MultiMeter if you get a chance.

MrForbes

11-01-2015 15:57

Re: My RoboRio needs a doctor

On thing that might help, is to post a couple of clear, large pictures of your electronics setup, so we can see if the wiring is right. It's easy to connect something to the wrong place, without realizing it. I know because I've done it.

If you get some more folks to confirm that it's all wired correctly, you can rule that out.

Al Skierkiewicz

12-01-2015 07:36

Re: My RoboRio needs a doctor

Quote:

Originally Posted by emileh3467 (Post 1426240)

In order for the RoboRIO to work you do not need to have it wired via CAN. The PDP can function fine without any can interfacing.

The CAN will be used for logging PDP data, hence the robot rule requiring that CAN be connected to the PDP. It is not needed for operation of the RoboRio nor the PDP.

All times are GMT -5. The time now is 14:37.

Page 2 of 2

Show 100 post(s) from this thread on one page