Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)
-   -   Can you use the secondary pressure regulator instead of the primary? (http://www.chiefdelphi.com/forums/showthread.php?t=132650)

Nick Nevarez 11-01-2015 16:07

Can you use the secondary pressure regulator instead of the primary?
 
I was trying to put the pneumatic system together and happened to not have a primary pressure regulator. I had gone to andymark.com and did not see it there. so i am asking can you use the secondary pressure regulator instead of the primary?

MrForbes 11-01-2015 16:22

Re: Can you use the secondary pressure regulator instead of the primary?
 
Quote:

R71 “Working” air pressure on the ROBOT must be no greater than 60 psi and must be provided through one primary adjustable,
relieving, pressure regulator, relieving, pressure regulator.
and the blue box says:

Quote:

Norgren regulator P/N: R07-100-RNEA or Monnier P/N: 101-3002-1 recommended.
Which sounds to me like they have a typo :) but if the "secondary" regulator you have meets the 125 psi requirement, and is a relieving pressure regulator, it should be ok. Keep in mind that I'm not the Q&A.

EricH 11-01-2015 16:22

Re: Can you use the secondary pressure regulator instead of the primary?
 
Quote:

Originally Posted by Nick Nevarez (Post 1426331)
I was trying to put the pneumatic system together and happened to not have a primary pressure regulator. I had gone to andymark.com and did not see it there. so i am asking can you use the secondary pressure regulator instead of the primary?

You can use any pressure regulator, provided it meets the R71 and R66G specs. FIRST has helpfully recommended a couple of regulators, but does not require their use.

I would also point out that AndyMark does have the Norgren pressure regulator. http://www.andymark.com/product-p/am-2020.htm


Also, a secondary pressure regulator is generally used after the primary regulator to further restrict pressure if one or more components cannot handle the pressure coming off of the primary regulator.


All times are GMT -5. The time now is 05:38.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi