Chief Delphi - Anyone used a roborio usb port for a flash drive?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - Anyone used a roborio usb port for a flash drive? (http://www.chiefdelphi.com/forums/showthread.php?t=132679)

tdbroun

12-01-2015 09:40

Anyone used a roborio usb port for a flash drive?

Our team is thinking of writing log files to a flash drive on the roborio so that we can access them in the pits when there are 3 mechanical guys climbing all over the robot (so we can't power it up and copy the files off).

When we drop a flash drive in, nothing happens. I'm no linux ace, but I assume I need to load a driver and mount the device on the filesystem.

Has anyone had success with this?

Joe Ross

12-01-2015 11:54

Re: Anyone used a roborio usb port for a flash drive?

It will be mounted to /media/sda1 with a symlink to /U. See the roboRIO user manual https://decibel.ni.com/content/docs/DOC-30419

tdbroun

12-01-2015 19:06

Re: Anyone used a roborio usb port for a flash drive?

Thank you very much. Works like a charm. I was expecting it under /mnt

All times are GMT -5. The time now is 07:28.