Wiring 12 Motors
 

We want to use 12 motors (4 - MiniCims, 4 - Cims, and 4 - BaneBot 755) for this years robot. However we have not used this many before and not sure where to wire them all because there is only 8 ports in the PDB for 40 Amp.

Can we use the 30 Amp ports to wire? Also we are using talons for our motor controllers.

Re: Wiring 12 Motors
 

While you can use the 30A fuses, just make sure your applications don't draw more than 30A.

Also, 12 motors is a lot. Expect heavy battery drain! Also be aware of what happens to motor outputs when the roboRIO drops below a certain voltage.

Edit: Also check rule R37 and R38 for proper wire gauge and motor controller rules.

Re: Wiring 12 Motors
 

Thanks for the help.