![]() |
How fast was the fastest mecaum?
Out of curiosity, has anybody actually geared their mecanum drives for anything above 15-16fps? Generally I see speeds of 10-12fps with mecanums.
I'm asking because I always see the claim that mecanums can't go fast, but I've actually never heard of anybody who has tried. There's nothing that limits it in theory, so I wanted to know the practical limit. |
Re: How fast was the fastest mecaum?
2052 has done a pretty good job of a fast mecanum bot: http://youtu.be/Ogy65hEPIXk
|
Re: How fast was the fastest mecaum?
Quote:
|
Re: How fast was the fastest mecaum?
At 291 we usually have pretty fast mecanum. We build custom gearboxs and see about 13-14 fps
|
Re: How fast was the fastest mecaum?
For a summer project, we built an octanum drivetrain powered off of 4 CIMs and 4 Mini-CIMs, and geared the mecanum wheels to 20.5 FPS free-speed. We saw speeds of about 17 FPS, on the field, and 19 FPS in our school's hallways.
In addition, we used the OLD Vex 6" mecanum wheels (the ones that break), and still had them last well enough for whole off-season competition. We have since switched to the updated versions, and they look like they should be fine (haven't tested through a competition though). |
Re: How fast was the fastest mecaum?
Quote:
How did strafing go? Even if it was slower than straight, how fast was it? Did you run a suspension? |
Re: How fast was the fastest mecaum?
Quote:
How did you measure the actual speed? e.g. video, stopwatch, etc? Would you be willing to share the raw data? |
Re: How fast was the fastest mecaum?
Here's another one, keep in mind they aren't on carpet. http://youtu.be/O_vvVU4OBT4
|
Re: How fast was the fastest mecaum?
Quote:
|
Re: How fast was the fastest mecaum?
Quote:
|
Re: How fast was the fastest mecaum?
Team Titanium's 2008 robot comes to mind.
|
Re: How fast was the fastest mecaum?
Quote:
|
Re: How fast was the fastest mecaum?
Quote:
The difference in hall vs field speed could be due to the difference in compliance of the flooring (carpeted field vs tiled hallway). |
Re: How fast was the fastest mecaum?
In a frictionless physics lab I would expect the free speed between the field (carpet?) & hall wall (tiles of other hard surface?) to be the same. In the world the wheels may not be perfectly aligned. The macanum rollers turns more freely on a hard surface rather than carpet. All this create side forces. The side forces net out to zero but consume energy thus a lower speed.
|
Re: How fast was the fastest mecaum?
Quote:
Our 2013 robot, Silverfish, used 8" mecanum with a 12.75:1 reduction for a free-speed of 14.53 ft/s (11.77 ft/s adjusted). Our 2014 robot, Dragonfly, again used 8" mecanum, but with a 10.71:1 reduction for a free-speed of 17.3 ft/s (14 ft/s adjusted). |
| All times are GMT -5. The time now is 21:04. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi