Chief Delphi - [FTC]: Gyro Position Question

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FIRST Tech Challenge (http://www.chiefdelphi.com/forums/forumdisplay.php?f=146)

- - [FTC]: Gyro Position Question (http://www.chiefdelphi.com/forums/showthread.php?t=132782)

ItsTebowTime

13-01-2015 16:51

[FTC]: Gyro Position Question

Hi: I just finished writing a code for using the Gyro sensor to turn more accurately in autonomous. Unfortunately I can't mount the sensor in the direct center of the robot because of our lift. If I have it centered between the drive train (left to right) and centered vertically, is it okay if it isn't centered front to back (mounted on the very back of the robot)? Thanks.

MattRain

13-01-2015 16:57

Re: [FTC]: Gyro Position Question

The Gryo Sensor does not need to be centered in the robot. Ours is on the right side, of the robot and still works correctly.

ItsTebowTime

13-01-2015 21:02

Re: [FTC]: Gyro Position Question

Quote:

Originally Posted by MattRain (Post 1427614)

The Gryo Sensor does not need to be centered in the robot. Ours is on the right side, of the robot and still works correctly.

Great: thank you very much!

docdavies

13-12-2015 15:44

Re: [FTC]: Gyro Position Question

Can you tell me how you implemented a gyro in FTC?

What sensor did you use, and how did you interface it to the new Android control system?

All times are GMT -5. The time now is 17:01.