Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   How to display Microsoft webcam on frc driver station camera view (http://www.chiefdelphi.com/forums/showthread.php?t=132814)

H$H4RK 13-01-2015 19:45

How to display Microsoft webcam on frc driver station camera view
 
Hello, I am new to FRC and i am wondering how do i display image feed from a microsoft HD webcam plugged in into the usb port on roboRio to the camera view option on FRC driver station.:]

RufflesRidge 13-01-2015 19:48

Re: How to display Microsoft webcam on frc driver station camera view
 
What language are you programming in?

SquishyIce 13-01-2015 20:05

Re: How to display Microsoft webcam on frc driver station camera view
 
/http://www.chiefdelphi.com/forums/showthread.php?t=132714

My reply on this thread turned out to not be as relevant as I thought towards OP's question, but maybe it can help you. DISCLAIMER: This is java-specific. You might want to specify what language you're coding in.

H$H4RK 14-01-2015 20:20

Re: How to display Microsoft webcam on frc driver station camera view
 
I found a solution at http://www.chiefdelphi.com/forums/showthread.php?t=132686 turns out there is no need to code if you are using the default dashboard to display the camera view:]

RufflesRidge 14-01-2015 23:00

Re: How to display Microsoft webcam on frc driver station camera view
 
Quote:

Originally Posted by H$H4RK (Post 1428398)
I found a solution at http://www.chiefdelphi.com/forums/showthread.php?t=132686 turns out there is no need to code if you are using the default dashboard to display the camera view:]

Correct, if you are using LabVIEW.

H$H4RK 15-01-2015 10:47

Re: How to display Microsoft webcam on frc driver station camera view
 
One more question: do the Microsoft USB camera take less bandwidth than the axis cameras?:]

H$H4RK 15-01-2015 18:49

Re: How to display Microsoft webcam on frc driver station camera view
 
Hello guys, i just tested the instruction above on the robot, the camera was on but no images appeared on the FRC control panel. How do I solve that problem?

H$H4RK 15-01-2015 18:56

Re: How to display Microsoft webcam on frc driver station camera view
 
PS: the blue light on the Microsoft HD Camera 3000 flashes twice but turns off after that.

RufflesRidge 18-01-2015 09:13

Re: How to display Microsoft webcam on frc driver station camera view
 
Quote:

Originally Posted by H$H4RK (Post 1428929)
PS: the blue light on the Microsoft HD Camera 3000 flashes twice but turns off after that.

Was the camera plugged in when you booted the roboRIO? If not, I would try that. And make sure you have selected USB HW or USB SW on the dashboard.


All times are GMT -5. The time now is 08:04.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi