Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   [FRCTop25.com]- Premiere Night 2015! (http://www.chiefdelphi.com/forums/showthread.php?t=133168)

notmattlythgoe 25-02-2015 08:06

Re: [FRCTop25.com]- Premiere Night 2015!
 
Quote:

Originally Posted by Alex Cormier (Post 1449432)
Looking through these reveal videos, I have seen some before the reveal night. Wasn't that not allowed?

It was not as heavily restricted this year. They just asked that you try not to release too much prior to the Premier Night. We were one of those teams that released their video early, as we have always been very open with our robots. We had planned on entering a different video for Premier Night, but the snow prevented us from being able to get more video and get a video put together in time.

We were very happy that Top25 reduced their release restrictions this year. I think it gave more teams the opportunity to participate because they were not forced to keep everything hidden until after the build season.

Anthony Galea 25-02-2015 08:17

Re: [FRCTop25.com]- Premiere Night 2015!
 
Quote:

Originally Posted by Sperkowsky (Post 1449517)
I admit I haven't and I'm not trying to start an arguement. My point was not to go after them particular but elite teams in general no student built can compete with a mentor built bot. Period.

I really don't agree that a student built bot couldn't compete with a powerhouse, or what you are calling a 'mentor built bot'. Considering that I have seen teams that I am 100% sure that their students built the robot (just from going to their build space or them being able to help us in ours), that are able to be consistent contenders in their area.

For elite teams, it isn't a thing of mentors usually, its usually experience and how well these teams' students understand what works and doesn't work in FRC, and then pass their information and knowledge from upperclassmen to underclassmen.

On our team, our mentors are pretty hands-off, and the only time they help with fabrication is when we need to use certain equipment. However, they do offer great advice and insight for a validated opinion on when there is debate.

But that may not be the best way for some teams. Run your team how you want to, and we will run ours our way.

g_sawchuk 25-02-2015 09:18

Re: [FRCTop25.com]- Premiere Night 2015!
 
Quote:

Originally Posted by Sperkowsky (Post 1449508)
Top 25 celebrates the good times just not the elite few. The thing is what I like about it is they are student built. Like seriously you can't convince me 254 kids without the mentors and sponsors can make a robot even close to what they make. I'm not of the mindset that "nasa buids their robot" but I do believe they help a lot. It's remarkable what they do but honestly it doesn't belong in a high school robotics program.

The objective of FIRST is to build robots with mentor involvement. Although I strongly agree that many teams are very mentor built/mentor run, I strongly believe that teams like the Poofs, Simbots, Coyotes, OP Robotics etc. have just found a way to maximize their skills in mentoring students without making the robot mentor built. They just know how to teach their students. This most certainly belongs in this program. Their skills deserve recognition and congratulations, not accusations.

JesseK 25-02-2015 09:32

Re: [FRCTop25.com]- Premiere Night 2015!
 
Was premiere night archived? I had to spend last night preparing to travel next week.

Boltman 25-02-2015 09:34

Re: [FRCTop25.com]- Premiere Night 2015!
 
Quote:

Originally Posted by JesseK (Post 1449613)
Was premiere night archived? I had to spend last night preparing to travel next week.

https://www.youtube.com/user/MikeandJustinITM/videos

Chris is me 25-02-2015 09:34

Re: [FRCTop25.com]- Premiere Night 2015!
 
My apologies for the derailing conversation; I probably should have taken this to PMs. Great Reveal Night, I regret that we were too not-done to send in a video this year, lots of great teams this year.

Quote:

Originally Posted by Sperkowsky (Post 1449517)
I admit I haven't and I'm not trying to start an arguement. My point was not to go after them particular but elite teams in general no student built can compete with a mentor built bot. Period.

So this is a point people make all the time, that I'm sure a few dozen people will respond to with the commonly repeated, but still very valid, points. That FIRST isn't about students building robots, it's about inspiring students; that "100% mentor built" teams actually tend to be some of the 'worst' (least competitive) teams, not the best; that kids wouldn't want to *be* on a team where they didn't do anything; that constantly making these accusations undermines the sacrifice and hard work of thousands of bright students across the country every year; that FIRST is about the student-mentor partnership first and foremost; that people saying this crap are arrogant enough to think anyone better than them must be cheating.

Here's a different angle. I'm a mentor, and I know enough that I could probably try to build my own robot. I'm about to graduate with a degree in Mechanical Engineering, this year's robot is the 7th robot I've been involved with in FRC. But building robots is really hard. We don't have a FIRST Robotics Instruction Manual anywhere that tells us what the perfect designs are, or what the best intakes look like, or what the optimal strategies are. Mentors don't have some kind of secret knowledge of how to build robots that students aren't privy to. We can't do it without the whole team, especially the students.

This year, I did a lot of design work on my team. CAD is the only thing left on my team that you can truthfully say is done mostly by mentors; even so, our team's teachers are integrating robotics lessons into the CAD coursework at the school so in future years students and mentors will work side by side in every aspect. But as a designer, I couldn't even start to do work without the excellent, detailed, iterated, student-driven prototypes. Without the incredible machinists to make really intricate parts (or to tell me "Chris, you're an idiot, that's never going to work..."), the robot wouldn't exist. Without our amazing software team, including one of the brightest students I've ever had the privilege of working with, the robot would be absolute garbage this year (if we made the same design).

And even outside of the robot, we couldn't do robotics without the whole team. Who raises thousands of dollars every year to get us supplies and two regional events? The students, with some organization done by amazing parents. Who recruits vigorously every year, growing our team size from ~16ish to ~45 in a handful of seasons? Wasn't me. Who scouts, who demonstrates the robot, who prepares Chairmans, who wires, who tests... Can you really believe half a dozen professionals really have the time to do all of that, at the very top level, without burning themselves out? No, that's ridiculous. I'm burned out and I just show up for two months and draw pictures.

Honestly? There are some mentor built teams out there. But they aren't 254, 1114, etc. Those teams need the hard work of tons of mentors, parents, AND students to do absolutely everything they do at the top level. The mentor built teams tend to be teams with... awful robots. Teams you'd hate to play with, because they don't do anything. An overzealous teacher or parent considers the robot their personal playset, and shoves kids out of the pit whenever it gets so much of a scratch. And these teams never do well, because running a robotics team is too hard for just a couple of mentors. They need the students too, and this might shock you, but students who don't get to do anything aren't exactly motivated to go above and beyond to fundraise, scout, strategize, and drive the wheels off their robots. These teams are really sad to watch if you ever run into them, and ironically, lots of their students and mentors are the ones crying 'mentor built!' about the very top teams as well.

The only way my team has gotten any good at robotics, being able to consistently hit that 80% quality (at SOME point in the season) has not been by having mentors do everything; it's been by training a complete team to learn all of the skills they need to do huge tasks themselves. And then having the great privilege of amazing kids who learn everything they can, and when you think you're too tired to go back, they keep asking you for more and more, or doing their own research for the betterment of the team. The only way to do well in FRC is to inspire your kids. That's the big secret right there, everyone.

The_ShamWOW88 25-02-2015 10:23

Re: [FRCTop25.com]- Premiere Night 2015!
 
Although it's a healthy discussion, let's try to keep the "Mentor/Student" build topic on the proper thread.

http://www.chiefdelphi.com/forums/sh...r+vs+studen t


Top25 does a great thing for the FIRST community and it's to get further recognition of your robot and team.

Bill_B 25-02-2015 12:17

Re: [FRCTop25.com]- Premiere Night 2015!
 
Quote:

Originally Posted by Boltman (Post 1449614)

Just finished putting indices on the composite videos on youtube. I hope those are the ones referenced by this link. Couple of glitches in the videos but quite a show guys. Thanks to all involved. Maybe I should start building soon? :) :D ;)


I tried anyway. being removed from comments for some reason. I could post here but the nifty links they make (made) into playback are the best part. Scratching my head for sure.

Sperkowsky 26-02-2015 11:57

Re: [FRCTop25.com]- Premiere Night 2015!
 
sorry to anyone I offended in this thread (cant believe the bad rep). I love the elite teams as much as the next guy I watch their reveals study their bots and wish I lived near them but.... I have my opinions. So please guys don't go crazy on people because they have a different opinion,

Bill_B 26-02-2015 22:05

Re: [FRCTop25.com]- Premiere Night 2015!
 
Stopped scratching. One comment reappeared and the other one still gone. reposted the part 2 index. hope it stays. On to real fun for week 1.


All times are GMT -5. The time now is 09:57.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi