Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Teaser: 2338's Electrical CAD (http://www.chiefdelphi.com/forums/showthread.php?t=133525)

evanperryg 26-01-2015 13:28
pic: Teaser: 2338's Electrical CAD
 

Alan Anderson 26-01-2015 13:50
Re: pic: Teaser: 2338's Electrical CAD
 
"Electrical"? You've got a lot of the pneumatic system front and center, and you've cut off half of the electrical components that you do show. ;)

pwnageNick 26-01-2015 14:47
Re: pic: Teaser: 2338's Electrical CAD
 
Are you guys planning on running all of your wires through the mesh or tubing that is shown? Won't that makes things a little difficult to debug issues or replace a single wire?

Also, I'm assuming those battery holder parts are 3D printed?

evanperryg 26-01-2015 16:27
Re: pic: Teaser: 2338's Electrical CAD
 
Quote:
Originally Posted by Alan Anderson (Post 1434164)
"Electrical"? You've got a lot of the pneumatic system front and center, and you've cut off half of the electrical components that you do show. ;)
more to come ;)

Quote:
Originally Posted by pwnageNick (Post 1434207)
Are you guys planning on running all of your wires through the mesh or tubing that is shown? Won't that makes things a little difficult to debug issues or replace a single wire?

Also, I'm assuming those battery holder parts are 3D printed?
Yeah, they're 3d printed. The blue tubes are the only way Inventor displays harnesses, most of them would be done with zip ties or velcro straps.


All times are GMT -5. The time now is 21:01.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi